brochure downloads This month’s free Simply click on the brochure cover or link to download a PDF of the full publication Steer: Omega Star extruders OMEGA SERIES
The OMEGA Series extruders are 'Generation Next' Co-rotating Twin-Screw Extruders with deeper flights that have supreme process capability. The latest technology extruders offer the best feeding ability, greatest energy efficiency and the highest
Specific Torque>
speed of operation that is practical { Do/Di = 1.71 and 3
- 11.3 Nm/cm }
The Omega Series co- rotating twin screw extruders from Steer offer a Do/Di ratio of 1.71 and minimum specifi c torque of 11.3Nm/cm3
. This brochure APPLICATIONS
Ÿ Ÿ Bio Polymers Ÿ Polymer Blends Ÿ Thermo Set Polymers Ÿ De-Volatilizing Ÿ Nano-particle Compounding Ÿ Reactive Processing Ÿ Solvent extraction
Automotive Compounds
Ÿ Specialty Polymers Ÿ Processing of shear sensitive material such as PVC, PSU Ÿ Thermo Plastic Elastomer / Vulcanisers Ÿ Fiber grade Polyester, Polyethylene Masterbatches Ÿ Natural fibers compounding Ÿ WPC Ÿ Engineering TP
provides key technical specifi cations for the eight models in the range.
THE OMEGA SERIES COME IN
CAPABLE OF OUTPUTS IN EXCESS OF PILOT-PLANT AND
PRODUCTION MODELS SEVERAL THOUSAND KGS PER HOUR
AND IN VARIOUS SIZES, 1 Click here to download Click here to download Plasmec: mixing technology
PARTNER IN MIXING
YOUR
This 12-page brochure details the full range of mixing technologies available from Italy’s Plasmec, including heating and heating/cooling combination models for PVC as well as units for powder coatings and WPC.
Bay Plastics: Strand pelletizers
SB 100 & SB 50 Strand Pelletizer
tics. From the soft rubber-like Elastomers to a highly filled & reinforced Nylon. The machine is designed as a production unit able to run 24 hr a day, 7 days a week, but is also a good fit for the laboratory environment.
T
he SB series of strand pelletizers is a cost effective, easy to clean, robust pelletizing system, designed to process the entire range of thermoplas-
Clean & Simple design
Easily removable infeed chute for thorough cleaning
SB 100 Shown
Removable Discharge Chute & Push-Pull Bed Knife Gap Adjustment
Standard Features:
Easy Access: No tools required to open the exterior cutting chamber cover. Safety: A unique designed interlock system prevents ones ability to bypass the switch with a simple bolt or pen. Cleanability: Our robust design is rugged and easy to clean. Feed Table: This machine is supplied with removable feed table assembly. Upper Feed roll: With a simple design, the upper roll remains parallel to the lower feed roll when multiple strands are being processed, resulting in a uniform pulling force on all strands Pulling Force: Large pneumatic cylinder and upper roll design this unit out performs all others in its class. Pneumatic Cylinder: This cylinder is a large 2 1/2” bore and located on the cover for optimal pulling force and conveniently swings away for cleaning Other Standards: Push-Pull bed knife adjustment } Eccentric mounted bearings for lower feed roll gap set- tings } four edge solid tungsten carbide bed knife } Stellite tipped rotor } special diamond knurled lower feed roll } Hypalon covered upper feed roll } AC variable frequency drive } stainless steel cutting chamber } aluminum cover assembly and aluminum top plate
Made in USA
The SB series of strand pelletizers is designed to provide cost effective and robust performance with a wide range of polymer materials. This two-page brochure explains the key product features, throughput data and model specifi cations.
Click here to download
MTI: PE-Xa mixing plant
Mixing PE-Xa efficiently and safely Raw materials impose high demands on mixer design
ATEX
PE-Xa is a proven material for gas, heating and water pipe systems, because cross-linking with peroxides significantly increases flexibility, resilience, temperature resistance and stress cracking resistance of high molecular weight PE. Since these characteristics outperform those of differently cross-linked PE pipes, and based on today's output-boosting demands in twin-screw extruder tech- nology, the production of PE-Xa piping is growing steadily. High-volume manufacturers, in particular, increasingly prefer a two-stage production process, using an MTI high performance mixer to blend the PE with additives and peroxide in a first step, providing a dry, free-flowing material mix. The extrusion of the pipe is then performed in a second stage.
Superior safety, improved quality
Splitting mixing from extrusion provides various advantages. A single MTI mixing system can, e. g., cost- effectively serve multiple extrusion lines, and the spatial separation of these two processes supports meeting the safety requirements applying to the processing and storage of peroxide and additives. In addition, MTI's specially developed equipment provides more thorough intermixing of the raw materials and hence, delivers a higher quality and more homogeneous result than with direct pre-mixing of the recipe at the extruder. The PE is wetted with peroxide in a manner enabling the latter to diffuse uniformly into the polyethylene. As a result, comparative studies performed by our customers have
Peroxide crosslilnked PE-Xa is a proven high performance material for gas, water and heating pipe applications. MTI’s purpose- designed PE-Xa mixing technology can improve product quality, improve operator safety and reduce manufacturing cost.
MTI Mischtechnik International GmbH · Ohmstraße 8 · D-32758 Detmold Tel. +49 (5231) 914 0 · Fax +49 (5321) 914 299 ·
info@mti-mixer.de ·
www.mti-mixer.de
04/2015 Click here to download
Xinda: compounding extruders
Learn more about the full range of reciprocating co-kneader and twin screw compounding extruders manufactured by Xinda Corporation in this 32-page brochure, which includes details on its latest SKW four-fl ight co-kneader product line.
Click here to download
Promixon: HMX horizontal mixer
Developed for cold high intensity mixing of additives and powders, Promixon’s HMX series of horizontal mixers can handle batch sizes from 100 to 5,000kg. This brochure explains the main design features and covers control and weighing options.
Click here to download
If you would like your brochure to be included on this page, please contact Claire Bishop.
claire@amimagazines.com. Tel: +44 (0) 1732 605976
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98