Each controller is supplied without clamp. An accessory clamp (BJ180-95) allows the controller to be used with almost any type of vessel where it can be attached to the vessel wall. When the controller is to be used with Optima bath tanks the clamp is unnecessary as a bridge plate is provided.
Model Temperature ranges†
without tank using S tanks
Stability, S tanks (DIN 58966) Uniformity, S tanks Setting resolution
Display Display resolution
Two point re-calibration Offset adjustment
External probe socket USB interface Programmable
using P tanks @ 70°C @ 70°C
T100
°C 0 to 100* °C 0 to 100*
TC120 -25 to 120*
0 to 120*(5/12/18L) -15 to 120* (26/38L)
0.05 0.1 0.1
TX150 -50 to 150*
0 to 150* (5/12/18L) -15 to 150* (26/38L)
0.01 0.05 0.1
TXF200 -50 to 200*
0 to 200* (5/12/18L) -15 to 200* (26/38L)
°C ambient +15 to 99 — TC120-P5/TX150-P5/TXF200-P5, ambient +5 to 99 — rest of range ±°C 0.05 ±°C 0.1 °C 0.1
0.01 0.05 0.1
4 digit LED °C 0.1
4 digit LED 0.1
yes no no no no
(0.01 using Labwise) Full colour QVGA TFT 0.01
No. of stored temperature values 33 3 yes no no no no
No. of stored programmes Relays
Heater power, 220-240V Pump
(water) Inlet/outlet
none none
kW 1.3
max. pressure mbar no pump max. flow L/min no pump
pipe bores mm n/a
Overall dimensions, excluding clamp Height above tank rim Depth below tank rim †
none none 1.3
210 16
6/11
mm 115 x 145 x 315 W x D x H — all models mm 200 — all models mm 135 — all models
A lid or layer of polypropylene spheres must be used when operating between 60°C and 100°C, and is recommended for use below room temperature. Above 100°C, a lid must always be used.
*Minimum operating temperature without accessory cooling is ambient plus 5°C, except in the 5 litre tanks, in which it is ambient plus 15°C. Minimum and maximum temperatures achievable are dependent upon the tank insulation and the minimum operating temperature depends on the accessory immersion cooler selected.
continued on next page
yes yes yes yes
yes via PC
1 x 30 segment 1
1.9
310 18
6/11
(0.01 using Labwise) Full colour QVGA TFT 0.01 3
yes yes yes yes
yes via PC/direct 10 x 100 segment 2
1.9 530
23 adj. flow rate 6/11
BJ180-18
BJ180-28 in use on tank with lid & +44 (0)20 7729 2405 e-mail: export@ajcope.co.uk fax orders: +44 (0)20 7729 2657
