Disposable cartridge deioniser. Requires a water feed which is clean, colourless and free from organic matter. Water purity is dependent upon the quality of the inlet water.
Catalogue No. Model
Output min./max. Water purity Flow rate, max Mounting Cartridge Meter
Voltage
Max. input pressure Overall H x W x D Weight
litres µS/cm litres/hour
DB685-12 CD100 40/160 2 to 30 120
Bench V
bar mm kg
Disposable — — 4
330 x 130 diameter 2.5
Permutit CD100 Supplied with one colour change disposable cartridge.
DB685-12 CD100
Spare disposable colour change cartridges. Supplied in pack of 2. DB685-50
Permutit Model 24R Deioniser
For regeneration by the user. Requires a raw water feed which is clean, colourless and free from organic matter.
Catalogue No. Model
Max./min. flow Optimum flow* Water purity
Maximum working temperature Minimum ambient temperature
(to prevent freezing of chemicals) Max./min. working pressure
* For maximum capacity between regenerations. Dimensions
Overall H x W x D Weight, filled
Regeneration drain (with 4m tubing) Raw water inlet tube (with 1.5m tubing)*
mm 1050 x 430 x 360 kg 60
mm, o.d. 12.7 mm, o.d. 9.5
Treated water outlet tube (with 1.5m tubing)* mm, o.d. 9.5 * Two connectors supplied (9.5mm o.d. tube to 3⁄4 inch BSP male).
Note: Local water authority requirements often necessitate units to be fitted with non-return valves and break tanks – these are available as optional extras. Regeneration requirements
30% w/w caustic soda 32% w/w hydrochloric acid Effluent volume per regeneration
litres litres
2.7 3.5
litres 400
Max. flow per regeneration (at max.working pressure) litres/hour 700 Regeneration time
minutes 90
Permutit 24R With cation/anion resin charges and battery for conductivity meter.
DB805-10 24R BL610-25 Accessory battery 9V
DB805-10 24R
litres/h 400/60 litres/h 200
µS/cm 15 to 30 °C 35 °C 15
bar 7/1.5 Capacity based on 100 ppm total anions (as CaCO3)m3 5.0
