water & air quality; water & damp proofing Pepenbury chooses EnviroVent
Pepenbury, a charity based in West Kent that provides care and support to peo- ple with learning disabilities, has chosen EnviroVent’s heatSava Single Room Heat Recovery Units to improve indoor air quality, reduce condensation and enhance energy efficiency. The charity approached EnviroVent to recommend an effective ventilation solution for its residential unit which supports 70 people. The heatSava is ideal for retrofitting in social housing and rented properties. The innovative unit recovers up to 75 per cent of heat that would normally be lost on extraction whilst providing continuous all-year- round good indoor air quality, resulting in energy and cost savings.
info@envirovent.com Vectaire’s Social Housing Catalogue
Vectairehas introduced a Social Housing Catalogue which details ventilation solutions using a wide range of high performance, low energy, economical, and environmentally friendly products with EC motors, (together with other low carbon products) all of which tackle the problems of condensation and pollution in dwellings. Products provide low level, continuous ventilation, often with heat recovery, with up to 93 per cent heat exchange efficiency, and are for installation into lofts, cupboards, ceiling voids and walls. Shown for the first time are the EVO200DC (a low profile, in-line WHHR) and the ELP1003 (a centrifugal fan for larger rooms).
01494 522333
www.vectaire.co.uk Waterproofing simplified with Remmers
Multi-Tight 2K is a new, flexible, mineral based waterproofing product from Remmers which has all the perform- ance properties of polymer-modified thick bitumen emulsions, while being “bitumen free”. Using unique rubber granulate filler technology Multi-Tight 2K has a crack-bridging capacity which is five times more effective than standard flexible mineral-based water- proofing systems. The versatility of the product allows it to be used to waterproof below ground externally and internally offering excellent resistance to ground or water pressure. It is quick and easy to apply, has fantastic levels of adhesion and dries in less than 18 hours.
01293 594 010
www.remmers.co.uk Vent-Axia improves indoor air quality
Vent-Axia, a leader in low carbon ventilation, has supplied large numbers of its Lo-Carbon™ PoziDry PIV Compact ventilation units and Lo-Carbon™ Quadra fans for a ventilation upgrade as part of a major refurbishment of three high-rise blocks of flats in Smethwick, West Midlands. The Lo-Carbon PoziDry PIV unit is ideal for controlling condensation in homes, particularly in the refurbishment sector. A loft mounted positive input fan draws fresh air from the atmosphere, filters it and gently introduces it into the dwelling via a ceiling mounted diffuser. The Carbon Quadra is a domestic fan suited to through-the-wall or ducted applications.
sales@vent-axia.com
New underground structure’s with Mapei
Mapei is pleased to announce the launch of Mapeproof HW. Based on nat- ural sodium bentonite, Mapeproof HW is a high performance waterproofing membrane, ideal for waterproofing concrete structures below ground level. Mapeproof HW consists of 5.5kg/m2 of natural sodium bentonite encapsulated between two-geotextiles secured with a special needle-punched system. The upper layer is a non-woven polypropylene fabric and the lower is woven fabric. Bentonite is a natural clay mineral which swells in contact with water, absorbing around 60 per cent of its own mass. Once swollen, the bentonite membrane forms a dense monolithic material creating an effective seal. This new product is a highly effective and simple waterproofing solution and is also a ‘green waterproofing product ’ is not only eco-friendly as it contains no solvents or VOCs but is also not dependent on oil as a raw material. Mapeproof HW is suitable for protecting structures against ingress of ground water. For more information, please visit the Mapei website.
0121 508 6970
info@mapei.co.uk 50 | HMM May 2016 |
www.housingmmonline.co.uk
Glidevale improves universal Versa-Tile
Glidevale, the specialist building products and ventilation solutions provider, has extended its tile ventilator range by introducing a new and improved version of its Versa-Tile G5 tile ventilator and terminal solution. The Versa-Tile G5’s universal design provides a single solution for the majority of single lap tiles, resolving the challenges around tile profile matching. With a sleek, new lower profile and guaranteed 20,000mm2
ventilation
area, it can be used for all roof space ventilation requirements and is the ideal solution for refurbishment projects where retrofit roof space ventilation is required following the installation of increased roof or loft insulation. It can also be adapted into a soil ventilation pipe or mechanical extraction terminal using Glidevale’s pipe adaptor and flexible pipe. With the Versa-Tile range proven in use for over 15 years, the Versa-Tile G5 ventilator is suitable for roof pitches between 20° and 60°. It is available in the following UV-stable colours: brown, grey, black, terracotta, red and red streak. The product is AA fire rated.
info@glidevale.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52