heightec® The Prism™
Prism™
Braking Devices for All Purpose Use SMC Micro U-Rack
descender is a completely new
product which offers great functionality to rope access workers. It contains a new patented mechanism which multiplies the braking force applied by the user providing fine control. An additional capability of this device is the ability to unthread the secondary braking system, which allows the rope to be easily pulled back through the device during short ascents.
Key Features: Double-breaking mechanism will stop if released or panic squeezed • Parts visible for easy inspection and maintenance • Designed for rope diameters between 10.5 mm and 11.5 mm • High strength aluminum with stainless steel friction surfaces • Patented variable friction design eliminates the need for a 2nd carabiner • User can switch between configurations under load
Weight: 1.13 lbs (500 g) COMPLIANT
HD26181 $220.75 EN 12841-C EN 341-B
Braking Devices MADE IN THE USA
The SMC Micro U-Rack assembly is the smallest and lightest of all SMC Rappel Racks. The design is based on the same principles of our proven NFPA Rappel Racks but more suited for sport climbing and caving expeditions. This device is ideal for either a long rappel or lowering as it evenly distributes the weight between both sides of the rack and does not allow the rope to twist. The Micro Rack MBS range listed below in the Key Features section is dependent on rope diameters tested from 7 mm to 12.5 mm.
Key Features: Designed for reliability • Rack frame and bars are polished Stainless Steel • Supports rope diameters from 7 mm up to 12.5 mm • Designed for long lasting service • Made in the USA
Height: 0.78” (2.0 cm) » Width: 2.75” (7.0 cm) » Length: 8.50” (21.6 cm) » Weight: 14.1 oz (400 g) » MBS: 8 kN* - 22 kN (1798 lbf - 5000 lbf)
SM13700 BERRY COMPLIANT $82.40
SMC Mountaineering 8 Easy to rig and handle when wearing gloves, this descender has smooth action on belay or rappel. Works well with either single or double ropes from 8 mm to 12.5 mm. Additional friction is gained by increasing the number of wraps.
MADE IN THE USA
Key Features: Effective for either single or double wrap braking • Works with 8 mm to 12.5 mm • Bottom hole can be used as a stitch plate • High quality aircraft grade 6061 aluminum
Height: 0.38” (9.0 mm) » Width: 2.96” (7.5 cm) » Length: 4.62” (11.7 cm) » Weight: 2.8 oz (79 g) » MBS: 27 kN (6070 lbf)
Blue SM81702 BERRY COMPLIANT $19.75
PMI®
Large Steel Rescue 8
The classic descender for ropework, the figure 8 is perhaps the most widely recognized component of all vertical gear. This XL steel version from PMI is designed for maximum wear and versatility. You can expect it to provide hundreds of hours of impeccable performance in just about any environment.
Key Features: Accepts single or double wrapping braking • Works with rope diameters up to 16 mm (5/8”) • Bottom hole can be used as a sticht plate
Height: 0.50” (1.3 cm) » Width: 6.75” (17.1 cm) » Length: 6.75” (17.1 cm) » Weight: 1.50 lbs (680 g) » MBS: 28 kN (6295 lbf)
HD26100 BERRY COMPLIANT $85.50
MADE IN THE USA
Hardware
Braking Devices
83
Rope
a nd Corda ge
Webbi n g
Pe r sona l Gea r
Ha rdwa re
Sol ut ions a nd Ki t s
Pat ie n t Car e
Log i st i c s a nd Suppor t Gear
Tra ining a nd Ed u c at io n
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138