Helmets
Helmets for All Purpose Use
Helmet Selection Helmets provide critical protection when working at height, whether from impact during a fall or from dropped items from above. Choosing the right helmet for the job is a matter of protection, compliance and comfort. PMI offers only helmets with 3 or 4 point retention systems that ensure the helmet stays put even during a tumbling fall. Helmets for technical rescue and work at height should offer sufficient impact protection, as well as meet the standards specified by your organization. Where heat protection is a requirement, choose the USAR helmet. For swiftwater, select a helmet with drain holes in the top and/or low volume to prevent being swept away by a sea-anchor effect.
Helmet Fit A comfortable, well-fitting helmet that is designed specifically for vertical work is essential. Helmets must have a secure chin strap and a three-point suspension to keep the helmet on the head when it is needed most. A three point suspension refers to a helmet with webbing support points on both sides of the helmet and at the rear. The chin strap should also be designed so that a relatively high force is required to cause a release. This helps keep the helmet on the user’s head in a tumbling fall. The inside suspension of the helmet should hold the shell away from the skull during a blow to the helmet and should provide air circulation and comfort, particularly during hot weather. The shell should have the rigidity to resist impact to the helmet and penetration by sharp objects but be flexible enough to absorb some of the blow that otherwise would be directly transmitted to the skull and spine.
HELMET PMI® PMI® Falcon PMI® PMI® PMI® PMI®
Brigade Rescue Advantage Current USAR
PMI®
Ventilator POD
TECHNICAL RESCUE
X X X
URBAN SAR
X X
X X X
X X
X
SEARCH AND RESCUE
X X
WORK AT HEIGHT CONFINED SPACE
X X X X
WATER RESCUE
New! PMI®
Falcon
PMI’s Falcon helmet is designed for use at work-at-height and for professional rescue. The helmet is equipped with both a four- point suspension system to reduce impact, and also a ventilation system with metal mesh for air circulation and protection from debris. It also features headlamp/goggle retainer clips. The new low profile design also contains a helmet adjustment dial with a four-point retention system for customized fitting. Weighing less than one pound, this helmet is very lightweight and also has a comfortable moisture wicking headband liner that can be removed and cleaned. One size fits most with a range of 20 to 24.4 inches and the design offers a good adaptation to various head sizes.
Key Features: 4 point helmet suspension system for impact reduction • Comfortable, moisture wicking headband liner that can be removed and cleaned • Ventilation system with metal mesh that provides air circulation on both sides of the helmet for maximum comfort while working and prevents debris from entering the helmet • Headlamp/goggle retainer clips • Helmet adjustment dial and 4 point retention system for customized fitting adjustments
Size: One Size » Head Circumference: 52 - 64 cm (20 in - 24.4 in) » Weight: .82 lbs (375 g)
Red HL33083 COMPLIANT White
HL33084 CE EN 397
$79.95
Falcon 44 Cat a log No 216
PMIROPE.COM T 1-800-282-ROPE
Tra ining a nd Ed u c at io n
Log i st i c s a nd Suppor t Gear
Pat ie n t Car e
Sol ut ions a nd Ki t s
Ha rdwa re
Pe r sona l Gea r
a nd Corda ge
Webbi n g
Rope
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138