WELDING


Zero colour sheet metal welds F


or welding sheet metal joints on titanium and stainless steels, Trailing Shields® can be attached to the welding torch to leave a bright shiny weld underneath. These low cost accessories, designed and manufactured by   prevent the need for expensive and time consuming cleaning processes.    welding torch.


These extra lightweight devices are easily carried along with the welding torch without any drag. The silicone side shields simply seal against the metal to prevent argon escaping and to prevent the entry of any oxygen or nitrogen from the surrounding atmosphere. As well as the inert argon gas coming through the weld torch   prevents oxidation or discolouration    ensure the weld stays under a protective argon gas coverage, while the hot weld metal is cooling,


preventing it from oxidising on contact with air.


Titanium and stainless steels are chosen for their corrosion resistant properties in particular and if they are then allowed to oxidise during the weld cycle, expensive  become necessary.


   


®


for sheet metal welding or in curved format for welding circular items like tubes, pipes and tanks. Use   savings in production costs.” As well as the shields for manual welding there are longer and wider versions for automatic welding. These allow faster welding without losing any of the weld shielding properties.


 QuickPurge your pipes for perfect welds


Waiting for pipes to be purged ready for welding can take many hours, depending on the diameter of the pipe being welded and the method chosen for purging.     waiting times so dramatically that they pay for themselves in less than one weld.


The company was recently tasked 32 IMT March 2016


      sleeves so that they could easily be pulled around the sharp bends in the pipework.


The welders were previously spending half a day purging the pipe, which was costing a considerable amount in time and gas costs. With


  The dramatic savings in time and  weld!”


 gas input line, which means extra purge gas can be introduced for applications such as this, thereby achieving a much faster purge, down to the lowest oxygen levels, which is perfect for larger diameter pipes 


www.internationalmetaltube.com


High speed pipe purging system      


    achieved and there will be no loss of corrosion resistance


will prevent oxidation, reduce gas costs and eliminate expensive post weld cleaning, giving payback in less than one weld.


Further information, contact: Michaela Reay, Marketing Associate


Huntingdon Fusion Techniques HFT® Telephone +44 7880 794 031 michaelareay@huntingdonfusion. com


Sales: hft@huntingdonfusion.com www.huntingdonfusion.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36