Legislation 34
Warning Lighting
Éclairage de mise en garde Warnbeleuchtung
Illuminazione di avvertenza Faros de advertencia
Luzes de aviso Advarselslygter
Waarschuwingsverlichting Varningsljus
Although this regulation has not been adopted in the UK any beacon carrying the ECE Reg 65 approval mark must meet the standard.
Look for this symbol on Ring products to be assured of ECE Reg 65 compliance. See: UN ECE United Nations Economic Commission for Europe
TA1-02 E1 xxxx
ECE Regulation 10 - Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility (EMC)
What is it? - Electromagnetic compatibility is the ability of a product to function in an electromagnetic environment without affecting other components or the vehicle. This applies to original equipment and aftermarket fitted products including warning lighting such as beacons.
What it affects - Vehicles in categories L, M, N & O.
Look for this symbol on Ring products to be assured of Reg10 compliance. See: UN ECE United Nations Economic Commission for Europe
10R-04 E1 xxxx
Type Approval - Legislation relevant to vehicle builders and converters EC Directive 2007/46/EC – European community whole vehicle Type Approval
What is it? – Certification granted to a product that meets a minimum set of regulatory, technical and safety requirements. A type approved product requires approval certifications, drawings & photographs. These are available from Ring upon request.
Do I need it? – As part of European Community Whole Vehicle Type Approval (ECWVTA) set out in 2007/46/EC, all categories of vehicles need to meet the requirements of Directive 72/245/EEC.
Products requiring E approval – Only those components that are defined as being ‘immunity-related’ require Automotive Type Approval.
‘Immunity-related’ is defined within the Directive, but the term applies to the following:
Related to the direct control of the vehicle Related to driver, passenger and other road-user protection
Related to causing confusion to the driver and other road users by optical and audible disturbances Related to vehicle data bus functionality Related to vehicle statutory data
If your product falls within any of these areas, you will need full Type Approval for components (e-marking) Source;
www.dft.gov.uk/vca
Those products defined as being ‘non-immunity related’ require compliance with the generic EMC Directive 2004/108/ EC or the RTTE Directive 1999/5/EC and CE-marking, along with a 2004/104/EC ‘Annex IIIC attestation’ from a Technical Service.
Who it affects – Anyone who builds on, converts, modifies, or adds to a type approved vehicle. See: VCA (Vehicle Certification Agency) the designated UK Approval Authority and Technical Service for type approval to all automotive European Community (EC) Directives and the equivalent United Nations Economic Community for Europe (ECE) Regulations.
Ring Automotive Limited +44 (0)113 213 7389 +44 (0)113 231 0266
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52