INDUSTRY NEWS
PRODUCTS & EQUIPMENT RÖHM reduces unnecessary parts to
increase revenue and productivity RÖHM uses the Parts Management System PARTsolutions to streamline design and interoperability among their 60 facilities
create their products they use more than 12,000 standard and supplier products, in addition to their own internally designed parts. With so many parts, streamlining product search and selection was critical to meet the needs of RÖHM’s 1500 employees at 60 facilities worldwide. RÖHM has worked closely with
R
CADENAS, utilizing their Parts Management System PARTsolutions to reduce duplicate parts, aide part search and reduce design time. Before PARTsolutions was implemented at RÖHM, CAD parts were manually filed in SAP, requiring a lot of effort with every new part. Depending on the type, each newly created part would cost the company at least 200 Euros ($270).
16 IMT October/November 2014
ÖHM is known as a worldwide leader in clamping and chucking tool technology. To
RÖHM counts on reliable solutions This is why RÖHM needed a Parts Management System that could reliably and accurately manage all components with relatively little effort. The goal was to simultaneously reduce the parts diversity while reducing costs. By standardizing design and implementing an easy method of supporting the parts catalog, the design processes is streamlined, saving time and finances for the company. Using parts over and over, instead of re-creating them, reduces the burdon for departments like procurement and logistics. RÖHM has always relied on robust software solutions, finding a new Parts Management System meant it would have to be equally as reliable. RÖHM has already had very good experiences with solutions by CADENAS in use at the company; therefore the Strategic
Parts Management PARTsolutions immediately became the focus of attention.
Increase in efficiency results in cost savings “In the eight years we have been using the Parts Management System, our product range has considerably increased. Needless to say this resulted in an increase of required parts as well. However, we have seen
About CADENAS
CADENAS is a leading software developer in the areas of Strategic Parts Management and parts reduction (PARTsolutions), as well as Electronic Product Catalogs (eCATALOGsolutions). With its customized software solutions, the company acts as a link between the component manufacturers with their products and the purchasers. With its 300 employees at 14 international subsidiaries, the name CADENAS (Hispanic: process chains) has been standing for success, creativity, support and process optimization since 1992. For further information, please visit:
www.cadenas.de/en
www.internationalmetaltube.com
that the new creation of parts increased only slightly compared to the diversity of parts used for our new developments. By using PARTsolutions unnecessary parts growth is avoided,” said Heinrich Müller – CAD Administrator at RÖHM GmbH.
More information on the RÖHM Parts Management System in the case study at:
www.cadenas.de/ partsolutions/customers/success- stories
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32