LOGIST ICS AND SUPPORT GEAR
PATIENT CARE
SOLUTIONS AND KIT S
HARDWARE
PERSONAL GEAR
AND CORDAGE
WEBBING
ROPE
ANCHORAGE CONNECTORS
SMC RESCUE STAYK
The new load equalizing rescue anchor system from SMC. Versatile and accommodating in various terrain, the StayK is designed for use by fire departments, rope rescue teams, swift water rescue teams, and other emergency responders. This system is very effective, efficient, and reliable.
Key Features: Maximum holding strength with ability to self-equalize and distribute the load • Able to be divided into multiple safety systems • Increased holding power and minimal soil disturbance due to anchor rod • Allows easy attachment of additional holding support if required • Available as a Single StayK or as a Kit of three StayK’s
Length: 35.10” (89.2 cm) » OD: 1.00” (2.5 cm)
Single Rescue StayK Weight: 9.24 lbs (4.191 kg) » MBS: Actual break strength is dependent on ground placement, density, and composition.
SM305100 $172.30
Rescue StayK Kit (3 StayKs) Weight: 28.37 lbs (12.868 kg) » MBS: Actual break strength is dependent on ground placement, density, and composition in conjunction with placement and system layout.
SM305130 USA MADE $472.20 PMI® SPEC HOOK
The Spec Hook is intended for use as an Emergency Escape Line anchor hook. This hook may be used to anchor a rope to any acceptable strength point in the area being exited. There are several ways to load the hook - including placing it over a window sill. A small eye at the bottom of the hook is for the escape line. During escape, keep the hook and line under constant tension.
Key Features: Compact size • Lightweight Aluminum • Easy to use MBS: 35 kN (8000 lbf - saddle) 12 kN (3000 lbf - tip) » Weight: 10.2 oz (289 g)
Orange HD26220
USA MADE Black HD26222 $70.00
Rotation Blocks with Connection Points. CLIMBT ECH I BEAMER CLAMP
This I-Beam Clamp is the lightest and nimblest of its kind. It is specifically designed for fall protection, work positioning, restraint, personal riding, and more. A 360 degree swivel D-ring allows for ultimate freedom when connected to a lanyard or other attachment. This I-Beam can hold up to 400 lbs. Optimum strength is achieved with a solid steel design and a 7-series aluminum support rod.
Key Features: Support bar is 7071 Aluminum alloy • Flange hook is 6061 Aluminum alloy • Flange insert is Aluminum Bronze • Flange stops and D-ring mount is stainless steel • Adjusts from 3” to 12”
MBS: 22 kN (5000 lbf) » Weight: 3.40 lbs (1.540 kg) Blue
HD26229 CERTIFIED $200.00 ANSI Z359.1 CE EN 795
Scott Melcer Photography
76
CATALOG NO
214
PMIROPE.COM T 1-800-282-ROPE
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116