ROPE
AND CORDAGE
WEBBING
PERSONAL GEAR
HARDWARE
SOLUTIONS AND KIT S
PATIENT CARE
LOGIST ICS AND SUPPORT GEAR
ROPE GRABS AND ASCENDERS
h e i g h tec® PULSAR ASCENDER
The Pulsar is a completely new ascender with an innovative cam design. Increased performance over traditional sharp toothed models, the X-Cam™ significantly reduces the possibility of complete system failure by exerting a considerable hold on a rope without the sharp teeth that may damage the sheath of the rope.
Key Features: Comfortable profiled grip • Two lower attachment points to separate lanyard and footloop • One upper attachment point • Shaped for optimum pulling position • Features the X-Cam™
Weight: 7.8 oz (221 g) » Sizing Info: 8 mm - 13 mm rope Right Hand-Green
HD26183 Left Hand-Black (not shown) HD26208 CERTIFIED EN 567, EN 12841-B
$81.50 $81.50
PMI®
/SMC GRIP
This rope grab is a solid, compact performer that can be used as a ratchet or to grip a kernmantle rope whenever reliability and care are priorities. The compact curved body is easy to grip, and the secure, user friendly release mechanism makes putting this rope grab onto any rope - loaded or unloaded - a breeze. A specially designed cam protects your rope in the event of unexpected loading, but this unit is not designed as a belay or fall protection device.
Key Features: Ropes up to 13 mm • Anodized aluminum • Compact Gold
Height: 2.90” (7.4 cm) » Width: 1.85” (4.7 cm) » Length: 3.87” (9.8 cm) » Weight: 6.7 oz (190 g) » MBS: 5 kN (1124 lbf) » Sizing Info: 10 mm - 13 mm rope USA MADE
SM220500N $69.30 BERRY COMPLIANT CERTIFIED NFPA 1983 (2012), T
MIO ROPE GRAB
This highly effective self-trailing rope grab grips automatically in the event of a fall and dissipates the energy of the fall by slipping along the rope. When used within OSHA guidelines on approved ropes, the amount of slip is well within the OSHA requirements. Comes with lanyard and ANSI Snap Hook.
Key Features: Meets ANSI requirements • Used for fall arrest • Approved and tested with PMI®
Classic Static (page 6) •
Removable dual action pin for easy placement on rope • Stainless steel • Self-trailing
Weight: 1.38 lbs (626 g) 1/2” Rope (Blue Pin)
5/8” Rope (Black Pin) 7/16” Rope (Yellow Pin)
CERTIFIED ANSI Z359.1
HD26005 HD26006 HD26114
$206.50 $206.50 $206.50
HARDWARE
ROPE GRABS AND ASCENDERS
63
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116