TUBE 2014
Serco has more than 40 years technical expertise
S
erco design and manufacture a
comprehensive range portable machining
equipment for flanges, safety and sealing valves, high pressure valves, manholes and diesel engines.. This wide range of products provides solutions for all your construction, inspection, maintenance and repair works and includes:- Flange facing machines, single point machining, boring machines, grinding and special machines for diameters ranging from 0 to 6000mm. All to the highest accuracy and wth the finest tolerances. Serco machining units are
positioned and clamped by means of columns fixed on the outer part of the components to be machined. This also allows them to perform internal machining operations. They can be adjusted very easily and with a high degree of accuracy. Portable and adapted for extreme conditions and very tight spaces, they are also very light, safe for use on site, or in the workshop. The machines can be remote operated for works under ionizing environments or contaminated areas.
Suitable for all kinds of materials : carbon steel, stainless steel, exotic alloys such as incoloy, hastelloy, duplex, super duplex etc. Applications include Nuclear, Oil and Gas, Boilers, Shipbuilding, Chemical and Petrochemical plants,
Defence, Aerospace… Serco is proud of its position as world leader in the realm of portable on site machining equipment. Visit us at TUBE & WIRE 2014 in Düsseldorf and see a live demonstration of our powerful machining equipment. During Tube 2014 , we will present a new machining unit type TU 600 with specific device for conical valve seats.
Protem - the global on-site specialists for weld quality. Protem have been designing and manufacturing portable end preparation tools for tubes and pipes for more than 40 years.
Protem equipment serves virtually all industries, where the weld quality is critical, and where projects are time sensitive. Protem offer on site machining through a global network of qualified operators. All perfectly suited for construction, maintenance, repair and dismantling projects. Their portfolio of applications covers the broadest spectrum - the nuclear, oil and gas, shipbuilding, tube manufacturing, boilers, chemical and petrolchemical industries etc. Bevelling I, V, J, compound bevelling, facing, counter boring,
Burr Oak Tool at Tube Dusseldorf
Burr Oak Tool Inc. is exhibiting at Tube Dusseldorf in Hall 5/F01 at the Dusseldorf Fairgrounds in Dusseldorf, Germany from April 7 -11, 2014. This is the leading trade show for the tube industry with worldwide exhibitors and visitors. At the show, they will be
20 IMT February/March 2014
discussing their new Oak Triumph straight tube cutoff machine, which increases productivity with a faster cycle time and processes eight tubes per cycle. The stretch straighten feature eliminates rollers and straightens in all planes. Length changes on the same diameter tooling are made
in seconds and a new innovative cutter head design delivers superior cut quality. The Triumph straight tube cutoff machine features an overall footprint that is slightly smaller than the previous OAK single tube cutoff machine, which saves floor space. For 70 years Burr Oak Tool
www.internationalmetaltube.com
severing, surfacing, finishing works can either be processed individually or simultaneously. Their equipment range allows you to achieve repeatable high quality weld end preparation within a few seconds, and is ideally suited for manual or mechanized welding
processes.The Protem range of equipment includes : ID and OD clamping bevelling and cutting machines, orbital cutting machines, yube squaring machines and surfacing machines, special machining equipment, high speed bevelling and cutting benches, pipe facing machines and bevellers. They are also suitable for all kinds of materials : carbon steel, stainless steel, exotic alloys such as Incoloy, Hastelloy, Incoloy Duplex and Super Duplex, P91 etc. With a portfolio of customers from around the world, the company offers competence, efficiency and a reliable service. Our staff will be at Tube 2014 to advise you in a professional manner the right equipment that will meet your technical requirements. See us at TUBE & WIRE 2014, Hall 6, booth F22. During the TUBE SHOW, we will present a new pipe bevelling machine suited for boiler works (removal of weld on tube panels)
More Information on Protem and Serco
www.protem.fr
Inc. has designed customized production machinery for the heat transfer and tube processing industries. OAK machines are installed and successfully operating in over 70 countries.
More information on Burr Oak Tool Inc.
t: +1 269-651-9393, f: +1 269-651-4324
www.burroak.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36