Technical Specification Measuring Principle


Ignitability from small flame source


Cabinet Dimensions (exterior) 700mm (W) x 400mm (D) x 800mm (H) System Dimensions Sample holder


Anemometer Stopwatch


Services Test Room


Gas Supply Hood ± 0.1 m/s accuracy Accuracy better than 1 second in 60 minutes 1500mm (W) x 1200mm (D) x 900mm (H)


Standard holder and holder for products which melt or shrink included


The ignitibility apparatus should be situated in a draught free environment at 23 ± 5°C and a relative humidity of 50 ± 20%.


A supply of natural gas of minimum 95% purity. In order to obtain flame stability the gas pressure shall be between 10kPa and 50kPa.


The combustion chamber should be situated under a suitable extraction system.


Due to the continuous development policy of FTT technical changes could be made without prior notice.


Other Euroclass Test Methods Detailed product catalogues are also available for: 





Single Burning Item EN 13823 Reaction to fire tests for building products excluding floorings exposed to thermal attack by a single burning item, the SBI


Oxygen Bomb Calorimeter EN ISO 1716 Reaction to fire tests for building products – Determination of the heat of combustion.





Non Combustibility Apparatus EN ISO 1182 Reaction to fire tests for building products – Non combustibility test.





Flooring Radiant Panel EN ISO 9239-1 Reaction to fire tests for building products – Horizontal surface spread of flame for floor coverings.


Charlwoods Road East Grinstead West Sussex RH19 2HL Tel: +44 (0)1342 323600 Fax: +44 (0)1342 323608 email: sales@fire-testing.com web: www.fire-testing.com


Page 1  |  Page 2  |  Page 3  |  Page 4