The FTT Ignitibility Apparatus


EN ISO 11925-2 is based on the Kleinbrenner method for determining ignitability of building products in the vertical orientation by direct small flame impingement under zero impressed irradiance.


The FTT Ignitability Apparatus is supplied as a complete easy-to-use system incorporating safety features. It has large front and side doors for easy access.These are glazed with toughened glass for full view of the specimen during a test.


Fully Adjustable Burner


An extensively adjustable burner assembly, mounted on runners enables the small premixed flame to be tilted at an angle of 45° to the specimen and offered to it in one fluid movement.


A fully adjustable specimen support frame facilitates lateral and vertical movement of the specimen holder so that the flame can be applied at the correct position for either surface exposure or edge exposure.


Specimen Holder


The specimen holders are capable of housing the specimens up to and including 60 mm thick.The FTT ignitibility apparatus is supplied with two different specimen holders:


Accurate Measurement


A digital anemometer/thermometer and a stopwatch are incorporated for simple but accurate measurement of the flow, temperature and time.


Standard sample holder


Sample holder used for products which melt or shrink away from the flame without being ignited


Page 1  |  Page 2  |  Page 3  |  Page 4