To feature in What’s New, call Sarah Norwood on 01622 699177 Oventrop integrated solution for ‘blue to green’ project
Cofloor underfloor heating system at Cobalt Place, a 104‐dwelling residential development of one, two and three‐bedroom contemporary apartments and four bedroom townhouses, in Battersea Village. Oventrop were chosen by developer Lend Lease along with contractor Cilantro Engineering UK Ltd for their ability to provide both the “Regudis” Heat Interface Unit, and the complete UFH installation, with the HIU, UFH controls, manifold and heat meter all located in one neat cabinet.
O
ventrop Projects Division successfully designed, supplied, installed and commissioned a 7,300 m2 Oventrop
Cobalt Place is an example of the new ‘blue to
green’ concept being adopted by forward looking companies. This means it’s not enough for a product to be just sustainable; it must also return something to its surroundings, its community, and those who use it. With its strikingly modern apartments and
trendy location it combines the fun and friendliness of an urban village lifestyle with the inspiration of living in one of the world’s greatest cities. Sustainable design is at the very soul of Cobalt Place with a range of eco features that set exemplary standards. For more information call 01256 330441, email:
info@oventrop.co.uk or visit:
Waterloo’s security grilles satisfy prison service’s air distribution needs
meet the specific requirements of the prison and detention services. “Our security grilles combine high quality
U
air distribution with aesthetics and they are fully compliant in environments where security and safety are paramount,” says Rick Edmondson, Chairman of Waterloo. The grilles were developed in
conjunction with the prison service, to supply and extract air for low, medium and high risk situations where security is a fundamental concern. They are suitable for any building with detention facilities and other buildings of confinement where tamper‐proof features are essential. Matreya Southgate, Product
Development Manager, explains. “Ventilation is an essential requirement in detention cells. Section 14 of The Prison Act 1952 requires cells to provide ventilation that is adequate for good health. Regular air changes are needed within these confined spaces, to meet the demands of Section 14. Air distribution grilles in these environments need to be multiple‐functional. They must be securely fixed and tamper proof to prevent prisoners escaping through ductwork or using them as instruments to either self‐ harm or injure others, whilst still distributing air efficiently throughout the building.” Waterloo’s security grilles have anti‐
vandal and anti‐ligature features. They comply with the Ministry of Justice Prison Service specifications and the Home Office Police Custody Design Guide (HOPDG). The grilles are manufactured as standard from 3mm thick mild steel plate and are suitable to be either wall or ceiling mounted. Each
K air distribution manufacturer Waterloo Air Products plc offers a range of security grilles designed to
WHAT’S NEW BSEE
The cool way to learn about Far infrared heating
explains Far infrared simply, yet thoroughly. There is also a new accreditation exam for installers and a redesigned marketing portal for dealers. Herschel is the only company to
www.oventrop.co.uk
Herschel’s new and updated online training facility, available via the Herschel Infrared Technology Centre, is on a new, improved platform that is easy to use and also allows offline access via iPad. Herschel’s training programme is designed to keep installers ahead of the game. It includes a brand new introductory course that
O
ffering dealers and installers world‐leading instruction in infrared heat,
offer this level of training. Other benefits of Technology Centre membership include newsletters, access to Herschel’s infrared experts, opportunities for work referrals, networking for infrared professionals and marketing documentation for approved partners. Richard Martin, Head of Market
development & Technical Training at Herschel, comments: “Our online training courses are essential for anyone involved in the heating industry.” For more information call 01473 760 059 or visit:
www.herschel‐
infrared.com
type can be supplied with a range of plenum boxes, dampers and fire blocks. All three grilles are available in rectangular, square or circular size options from a minimum 75mmx75mm to a maximum size of 1000mmx600mm, with 3mm perforated face plates and provide a duty range of 10 l/s to 800 l/s. All feature side or top entry connections,
Allen key operated opposed blade dampers and plenum boxes. The SG1 high level security grille features rear fixing only whereas the SG2 medium security grille offers face and rear fixing. The SG3 low security grille offers face fixing and is available as a face plate only. The grilles are provided with Zintec coating as standard and are available in RAL9010 white or RAL9006 silver with other colours available on request. Waterloo has successfully designed and
installed security grilles in prisons across the UK. For more information call 01622 717861
or visit:
www.waterloo.co.uk www.jsaircurtains.com REHAU’S district heating pipework achieves WRAS approval
complete range of pre‐insulated pipework and associated fittings. REHAU’s approval is now included in the online WRAS directory. REHAU’s popular RAUTHERMEX and
D S
RAUVITHERM pipework ranges in uno and duo configurations have been approved along with the associated EVERLOC fittings, giving the company an advantage in the district heating market. REHAU’s Developments, Standards & Approvals Manager Malcolm Morgan said:
istrict heating and renewables specialist REHAU is celebrating after achieving coveted WRAS certification on its
“Gaining WRAS approval for our entire range of pre‐insulated pipework is a testimony to how committed we are to this market and to the quality and performance of our products. “WRAS is not just about safety and
preventing contamination but it’s also about encouraging the efficient use of water, and that is perfectly in line with REHAU’s environmental agenda.” REHAU’s RAUTHERMEX and RAUVITHERM high performance PE‐Xa pre‐insulated pipework is used extensively in district heating schemes across the UK where the emphasis is on thermal performance, speed
manufactured condensing boiler range. The Wessex ModuMax mk3 boiler builds on the heritage of a boiler range that has been in production for more than ten years, but brings it up to date with enhanced built‐in controls, 40°C ΔT optimisation, and a 10‐year warranty on the primary heat cell. Keith Thompson, Sales &
H
and ease of installation and design support. Further information is available at:
www.rehau.uk Sontay becomes BCIA training partner
ontay, the field control devices company, has partnered with the Building
Controls Industry Association (BCIA) as an official training partner. Sontay will hold a number of BCIA courses at its training facility in Edenbridge, Kent, and can award attendees a BCIA Diploma. The BCIA represents
companies that manufacture, install and maintain building controls and Building Energy
technology. Sontay is offering courses BC0 to BC5, which will be run by a BCIA trainer with course material provided by the association. “We are thrilled to be an
Management Systems (BEMS). It offers seven levels of training (BC0‐BC6) starting with an introduction to building controls and going right through to the control of ventilation, air conditioning and refrigeration
VISIT OUR WEBSITE:
www.bsee.co.uk
official training partner for the BCIA,” comments Sandy Damm, Managing Director at Sontay. “Sontay has always placed a high importance on training and we have an excellent training programme in our Sontay Academy. Launched in 2014, the
Academy offers a wide variety of courses and can contribute to CPD activity through the Wireless, Water & Heat Metering and Smart Communication courses. Partnering with the BCIA is proof of our commitment to training and we are looking forward to a bright working relationship.” To book a space, contact
sales@sontay.com or visit:
www.sontay.com
Marketing Director for Hamworthy Heating said: “The Wessex ModuMax boiler has been our bestselling boiler for many years. In the improvements to the range we have responded to market demand and customer feedback to add in new features that make the boiler the best product for future commercial heating specifications.” Drawing on Hamworthy’s
experience in manufacturing modular boilers, this vertically stacking boiler offers close load matching and sits on a very small footprint. The ability of the boiler to operate up to 40°C differential temperatures helps to maximise the condensing performance and assists in designing heat networks – a top priority for the government to help meet energy efficiency targets.
The new built in Siemens
amworthy Heating has improved on an icon with their latest British
controls control of up to 16 boiler modules in a master/slave configuration, removing the need for separate controls or building management systems in smaller applications. All this is wrapped up with a 10‐year heat exchanger warranty for peace of mind. Keith added: “Although the look of the boiler has changed it has retained the benefits of this well‐ loved boiler range. Plus, we’ve included all the new features at no extra cost to our customers. We want to provide a product that suits the changing landscape of the commercial heating industry as well as long term stability and support from a British manufacturer.” The new Wessex ModuMax mk3 boiler also now features an air inlet filter to keep combustion air and burner free of dirt particles and speed up service and maintenance of the boiler. It is all housed in a new robust steel casing with an easy to remove front cover. The Wessex ModuMax mk3 is a
stainless steel high efficiency, fully modulating condensing pre‐mix floor standing boiler. Available in 5 modules with outputs (@80/60°C) of 97, 116, 147, 196 and 254kW. Individual boiler modules can be stacked one, two or three high in up to 15 combinations.
www.hamworthy‐
heating.com BUILDING SERVICES & ENVIRONMENTAL ENGINEER APRIL 2016 41
How does Hamworthy Heating’s new boiler stack up?
Chris, who is based in Sutton Coldfield, Birmingham, has more than 20 years’ knowledge and business experience in the HVAC industry having previously worked at ICS Cool Energy and Fläkt Woods.
C In his new role at JS Air Curtains, Chris will be
responsible for supporting and strengthening air curtain sales throughout his region in the middle and north of England. JS Air Curtains, a leading UK air curtain specialist, supply an extensive range of air curtains for all commercial and industrial applications. You can find out more by visiting the company’s new website at:
Chris Prentice joins JS Air Curtains
hris Prentice has joined JS Air Curtains as the Area Sales Manager for the Midlands and North of England.
uThe Wessex ModuMax mk3 condensing modular boiler from Hamworthy Heating.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48