FEATURE ROBOTICS & MOTION CONTROL
ROBOT BOOSTS PRODUCTIVITY FOR PULSE PROCESSOR
The first Fanuc M410iC/185 universal palletising robot has been installed in the UK at pulse processor Askew & Barrett, where it has helped to boost productivity by 15-20 per cent and eliminated a potential health and safety risk factor by automating a manual palletising operation
The Fanuc M410iC/185 universal palletising robot at Askew and Barrett boosting productivity by 15 - 20 per cent
A
skew & Barrett sources pulses from key agricultural merchants and then
sorts, cleans and grades them at its processing plant in Wisbech, Cambridgeshire. The pulses are bagged into 12.5kg and 25kg paper sacks and 25kg woven polypropylene (WPP) sacks, before being palletised and transported to food manufacturers and retailers at home and abroad.
PHYSICALLY DEMANDING Prior to investing in the new generation Fanuc palletising robot, Askew & Barrett used manpower to stack the sacks onto pallets. The problem was that in order to keep up with demand, during busy periods Askew & Barrett was having to operate the line 24 hours a day, six days a week. Although the working day was split into either two 12 hour or three eight hour shifts, this was still physically demanding work, and the company didn’t want to continue exposing its staff to that level of manual handling. “It takes it out of you, standing at the end of the line, stacking sacks onto a pallet. We wanted to take steps to ensure the physical wellbeing of our employees,” says production and warehouse manager Chris Askew.
AUTOMATED PACKING AND PALLETISING LINE Askew & Barrett engaged Pacepacker Services, Fanuc’s palletising integrator, to design a fully automated packing and palletising line that would reduce manual handling and increase productivity. For the palletising element, Pacepacker
26 OCTOBER 2015 | AUTOMATION
specified Fanuc’s new M410iC/185, the first of a new generation of Japanese- engineered palletising robots that combines Fanuc’s proven 99.99 per cent reliability record with tangible improvements in performance, allowing users across a range of industries to palletise heavier loads faster and stack pallets higher. Fanuc recommended this model on
account of its high cycling speed - the robot is capable of 1,700 cycles per minute - and its 185g payload. This combination results in heightened productivity and more efficient palletising of heavy payloads. “In designing the M410iC/185, Fanuc’s
engineers have harnessed the latest advancements in servo motors and drives to design a robot arm that is quite simply best in its class on every front: speed, payload, energy-efficiency and reach. We have absolute confidence that this robot will continue to exceed Askew & Barrett’s
performance expectations and prove completely reliable for years to come,” says Paul Wilkinson, business development manager at Pacepacker Services.
DUAL CELL CONFIGURATION The robot was installed in a dual cell configuration for maximum performance, and it is here that the M410iC/185’s compact 610 x 806mm footprint and extended reach capabilities come into play. In a dual cell configuration, the robot is sited so that it can swivel between two individually accessible pallet loading positions. This means that as soon as the robot has finished palletising a stack, it starts to palletise on the other pallet in the cell. “This is an extremely time-efficient
The M410iC/185 has increased palletising speed to 10 bags per minute, and has enabled the company to reduce the working week from six days to five without laying anyone off
configuration as the robot is always in use - it can start loading a new pallet while the full pallet is being transported to the delivery area. The M410iC/185 is ideal for dual cell installations owing to is small footprint and its reach of 2.4m - higher than any other robot in the same class - which enables it to service two cells effortlessly,” explains Fanuc UK technical manager Darren Whittall.
INCREASED PALLETISING SPEED The M410iC/185, which was installed in February, has increased palletising speed to 10 bags per minute, and has enabled the company to reduce the working week from six days to five without laying anyone off - staff have been redeployed to less physical tasks. Askew also reports that bags are now stacked more consistently onto pallets allowing for much “safer storage within our warehouse and easier loading into containers”.
Fanuc UK T: 02476 518415
www.fanuc.eu
/AUTOMATION
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72