This page contains a Flash digital edition of a book.
Investigating the behaviour of thin-film flows RESEARCH & DEVELOPMENT FEATURE


Imperial College London (UK) is using a FLIR Systems’ X6540sc thermal imaging camera to conduct innovative heat transfer experiments on thin-film flows. Studying heat transfer in thin-film flows is the key to enabling the accurate prediction of complex hydrodynamic processes, crucial for the design of many engineering systems that rely on these flows


R


esearch within the Clean Energy Processes group at the Chemical


Engineering Department of Imperial College London is aimed at the development and employment of new imaging techniques for conducting simultaneous spatiotemporal measurements of thickness, velocity, temperature and heat flux in thin-film flows. Dr Alexandros Charogiannis, a Postdoctoral Research Associate commented: “Being able to conduct high resolution (640 x 512 pixel) IR thermography measurements at high frame rates (100Hz) using the FLIR X6540sc camera will allow us to gain an unprecedented insight into the flow dynamics of a great range of flow regimes of gravity-driven thin film flows, gas- /shear-driven horizontal film flows and Marangoni flows”. He added: “During our evaluation process to select a thermal imaging camera we looked into 12 different camera options from FLIR and other


features a 640 × 512 digital InSb detector with spectral sensitivity from 1.5 to 5.5µm and a f/3 aperture. It provides images up to 125Hz in full frame and up to 4011Hz in a 64 × 8 subwindowing mode. Features on this research grade camera


companies. The excellent results from the demonstration of the X6540sc on our own thin film set-up coupled with FLIR's strong applications support convinced us that this camera was the optimum component to supplement our experimental setup”.


THERMAL IMAGING CAMERA The FLIR X6540sc thermal imaging camera provides ultra-fast frame-rate acquisition for applications involving dynamic thermal events. The device


Figure1: Conducting spatiotemporal


measurements of thickness, velocity, temperature and heat flux in thin-film flows using the FLIR thermal imaging camera


include high thermal sensitivity, snapshot imagery, a motorised spectral filter wheel and a detachable touch-screen LCD. The camera connects to ResearchIR Max R&D software for thermal imaging data acquisition, analysis and reporting. The X6540sc can be temperature-calibrated up to 300°C, or up to 3000°C with spectral and/or neutral density filters, and it provides measurement accuracy of ±1°C for standard configurations.


FLIR www.flir.com +32-3665-5100


Enter 3


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36