KNOWLEDGE TRANSFER NETWORK FEATURE Cooling the future
Advances in solid-state refrigeration could assist a number of multi-billion dollar industries and significantly reduce global warming emissions. The Knowledge Transfer Network’s (KTN) Tatiana Correia explains the pressing need for innovation
A
bout 36% of global warming emissions are caused by cooling and heating
buildings – and approximately 40% of energy consumption within the EU is used for this activity. It is therefore no surprise that a great deal of research has been done to reduce the environmental impact of artificially cooling environments by developing alternatives to vapour-compression technology. Any significant advances will have many
translatable benefits; a large number of industries such as electronics, automotive, healthcare, and oil and gas, use advanced cooling techniques within their equipment, products and systems. These are multi- billion-dollar industries - and advances in solid-state refrigeration have the potential to play a transformative role.
Some materials have shown the ability to
adiabatically change their bulk temperature under a magnetic field, resulting in the development of magnetic cooling. The electric analogue of magnetic cooling is electrocaloric cooling. However, attempts to make use of this in refrigeration applications are still in their early stages. A number of technical issues are yet to be resolved. Developing and improving materials capable of absorbing large amounts of heat from a cold reservoir is a top priority.
IMPRESSIVE PROGRESS In recent years there has been impressive progress. The electrocaloric temperature change has increased from 2.5kelvin (in ceramics) to 40kelvin (in thin films).
Unfortunately, these advances have been counterweighted by reported discrepancies in data, with different methods of measurement and/or different laboratories producing different results. There is a lack of traceability when it
comes to the techniques and procedures used, hindering any certainty with which we can state the electrocaloric cooling performance of a material. Progress in the field of electrocaloric coolers therefore depends on more than developing new electrocaloric materials: work needs to be done to develop the ability to traceably and accurately measure their properties.
A HISTORY OF SUCCESS Over the past six decades there has been unquestionable development in solid- state refrigerants but there is some way to go before they reach the wider refrigeration market. Efficiency needs to improve and costs need to be reduced. There are many challenges – but also many opportunities. KTN is aiming to bring together end-
users, materials developers, system integrators and metrologists to discuss the challenges and opportunities for innovative solid-state cooling technologies. KTN invites your views about hosting such an event.
Knowledge Transfer Network
tatiana.correia@
ktn-uk.org
Enter 2
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36