This page contains a Flash digital edition of a book.
POWER HACKSAWS


HIGH SPEED STEEL-RS HIGH SPEED STEEL


FEATURES • Available in metric and inch • Fully hardened molybdenum high-speed steel


APPLICATIONS • Ideal for cutting a wide range of materials


BENEFITS • Long wear life and top performance • Withstands heavier feed pressures providing faster cutting


CUTTING CHART FOR POWER HACKSAW BLADES-BS AND RS Material Thickness


Cross Section to be cut Low-Carbon Steel


Medium Carbon Steel High Carbon Steel


Carbon Low Alloy Steel Carbon High Alloy Steel Easy to machine steel Tool Steel


Up to 3/4" (20mm) Pitch* 14-10 14-10 14-10 14-10 14-10 14-10 14-10


Low-Alloy High Speed Steel 14-10 High-Alloy High Speed Steel 14-10 Cast Iron Class 20 Cast Iron Class 40 Cast Iron Class 60 Malleable Cast Iron Austenitic Cast Iron Inconel and Monel Stainless Steels Copper Bronze Brass


Aluminum *The blade should be tensioned correctly .


*Since you have two options for each thickness range, use a finer pitch (more teeth per inch) for thinner sections and coarser pitches (fewer teeth per inch) for thick sections. ** For materials with width higher than 3", decrease at least 20% of cutting rates.


14-10 14-10 14-10 14-10 14-10 14-10 14-10 14-10 14-10 14-10 14-10


From 3/4" to 1-1/2" (From 20mm to 40mm)


10-6 10-6 10-6 10-6 10-6 10-6 10-6 10-6 10-6 10-6 10-6 10-6 10-6 10-6 10-6 10-6 10-6 10-6 10-6 10-6


From 1-1/2" to 3-1/2" (From 40mm to 90mm)


6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4


Above 3-1/2" (Above 90mm)


4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2 4-2.1/2


Bow Speeds in Strokes per minute **


70-90 60-80 55-70 65-80 45-60


80-100 55 -70 50-60 45-55 70-80 65-75 40 -55 65-75 40-55 40-55 50-60


95-140 85-105 90-110


100-140


54


POWER HACKSAWS


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60