This page contains a Flash digital edition of a book.
NEW!


CARBIDE ADVANZ™


MC7


APPLICATIONS • Difficult to machine steels • Tool steels, heat-treated steels, stainless materials


FEATURES • Exclusive Starrett tooth geometry • Carbide tipped • Progressively ground trapezoidal tooth design • Utilizes a progressive four tooth grind creating seven distinct chips


• Positive rake angle • Sub micron carbide (HV1600)


BENEFITS • Cutting ferrous metals • Higher productivity through reduced cutting time • Precision cuts - superb surface finish • Excellent “cost per cut” for production cutting • Exclusive Starrett edge preparation - minimizes micro chipping


• Less wear compared to conventional triple chip


• Inconel, nickel alloys • Titanium


Width x Thickness Inches


mm 1-1/4 x .042 34 x 1.10 1-1/2 x .050 41 x 1.30 2 x .063 54 x 1.60 2-5/8 x .063 67 x 1.60


P = Positive Rake Furnished in welded bands. Note: Special products on request.


Pitch/Rake Material No. 2-3/P


1.4-2/P 2-3/P


1.4-2/P 2-3/P


.9-1.1/P 1.4-2/P


92573 92575 92581 92578 92582 92583 92584


MC7 (Seven Multiple Chips)


28


CARBIDE


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60