60. Steel Tracks Use your Bobcat®
skid-steer loader
in tough working conditions with over-the-tire tracks. These easy- to-install tracks allow you to fl oat over soft, sandy or muddy ground.
• Dual-induction hardened pads and traction bars provide exceptional traction and durability
• Heat-treated replaceable and reversible bushings and links increase reliability and service life
• Smooth, generous contours won’t cut or damage tire sidewalls
Compatible Equipment SSL
61. Stump Grinder
The carbide-tipped teeth quickly remove tree stumps. With excellent visibility to the cutting area and no need to reposition your loader, the stump grinder can be a real time-saver and money-maker.
• Three models
• Unique valve design prevents cutting wheel from stalling in the cut
• Rubber deflecting shields and screening provide additional operator comfort and protection from wood chips
Compatible Equipment CTL MTL SSL UWM
62. Sweeper
This simple-to-operate attachment sweeps, collects and dumps debris going forward or in reverse. Polypropylene bristles deposit debris in the bucket, which can be emptied when full. The optional gutter brush is perfect for cleaning curbs, along buildings and hard- to-reach places.
• Seven models: 44 to 84 in. • Steel bristles available
Compatible Equipment CTL MTL SSL TH (V417 ONLY) UWM
63. Three-Point Hitch Adapter Use Category 1 and 2 implements that meet ASAE standards with your Bobcat loader or ToolcatTM utility work machine. Easily attaches with the Bob-Tach® attachment mounting system. A 2-inch receiver allows you to tow a trailer.
Compatible Equipment CTL SSL UWM
64. Tiller Prepare ground for seed, sod or other plantings. Break up clumps, till and mix materials into existing soil. The handy offset mounting feature allows the operator to till next to sidewalks, curbs and buildings.
• Three widths: 40, 62 and 76 in.
• Three hydraulically driven models with no shear pins to maintain
• Bi-directional rotation for top-cutting and under-cutting in either direction
• Hardened, double-edge replaceable tines
• Three models of 3-point tillers available for compact tractors and the Toolcat 5610
Compatible Equipment CT CTL MTL SSL TH (V417 ONLY) UWM
65. Tilt Carriage The performance of a telehandler is enhanced by the tilt carriage attachment when working on uneven ground. It enables you to pick and place pallets from truck beds, scaffolding and rooftops by leveling the tilt carriage to align with the angle of the pallet.
• Two sizes: 48 and 60 in.
• Oscillates 15 degrees right or left
Compatible Equipment TH
60 61
66. Tilt-Tatch™ attachment With this hydraulic tool you can rotate an attachment right and left 15 degrees from center, allowing you to position attachments
independent of the loader or Toolcat utility work machine. Use it to cut a level path out of the side of a hill or dig a drainage ditch with the corner of the bucket.
• Replaceable wear components and debris guards on front of the Bob-Tach attachment mounting system
Compatible Equipment CT* CTL SSL UWM
* Requires front auxiliary hydraulics. Approved for use on CT440, CT445 and CT450 models.
67. Tree Fork For lifting, lowering and
transporting balled-and-burlapped trees, potted trees, decorative rocks and other odd-shaped objects, the tree fork is a real work-saver.
• Tree fork’s hydraulic arm opens and closes to grasp and hold objects securely against a rigid second arm
• Not for medium- or large-frame loaders
Compatible Equipment CTL MTL SSL
68. Tree Spade
The combination of completing work faster and with less labor makes the heavy-duty tree spade a valuable attachment. A single operator can use it to dig, transplant and load trees. A loader equipped with a tree spade is more mobile and productive than tractor- or trailer-mounted units.
• Five sizes, three spade shapes
• Open design for easy access to trees
• Adjustable legs allow for digging fi ve different types of tree balls
Compatible Equipment CTL SSL
62
63
64
65
66
67
68
EQUIPMENT KEY:
CT (Compact Tractor) CTL (Compact Track Loader) MTL (Mini Track Loader) MX (Excavator) SSL (Skid-Steer Loader) TH (Telehandler) 56 WORKSAVER BobCatalog 2012
ATTACHMENTS
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60