44
45
46
47
48
49
• Approved for dozens of Bobcat loader attachments
• Easy to switch between “remote” and “machine/direct” control modes
• Rechargeable transmitter battery has up to 15 hours of life
52
44. Loader Radio Remote Control System With the radio remote control transmitter you can operate the drive, lift, tilt and auxiliary hydraulic functions of your Selectable Joystick Controls- equipped loader including the all-wheel steer loader. When using this device, it is important to maintain visual contact with the loader and the loader’s path of travel.
• Bobcat Loader Radio Remote Control Operator Training Course features a DVD — along with classroom training and hands-on operation
• The Bobcat® loader radio
remote control system is not approved for certain types of hazardous or explosive environments (see the Operation, Maintenance and Parts Manual for more information)
• Bobcat loaders are the first and only loaders to be remote-ready
• Operate the loader remotely when you don’t want an operator in the cab
• Transfer controls easily to another loader
• Guard-bar protects transmitter controls from accidental activation and damage
EQUIPMENT KEY:
• Transmitter tilt sensor stops loader engine if the transmitter is tilted more than 45 degrees in any direction
Compatible Equipment CTL SSL
45. Push Broom Cleaning parking lots, warehouses, barns and other locations is cost-effective with this attachment. You can sweep wet or dry material, and easily clean along curbs and in confi ned areas.
• Operate the broom going forward or in reverse
• No flying debris, minimal dust
• Easy on operator and environment
• Attaches to loader bucket
Compatible Equipment CTL SSL UWM
46. Rear Stabilizers The tree spade and backhoe attachments can produce better results when the loader is equipped with a set of frame- mounted, quick-attach rear stabilizers. Grouser bars help prevent the loader from being pulled forward toward the work. Street pads are available.
Compatible Equipment CTL SSL
47. Ripper
Use your excavator to penetrate and scarify frost and hard ground.
Compatible Equipment MX
48. Scarifier With a Bobcat loader powering this dedicated front-end scarifi er you can dig hard-packed soil and rip up asphalt. Adjustable skid shoes and teeth provide multiple depth options.
Compatible Equipment CTL SSL
49. Scraper
Use this attachment to remove packed-on materials such as mud, ice and snow. It can peel away carpet and fl oor tile, too.
• Two models: 36 and 45 in. • Self-sharpening cutting edge
Compatible Equipment CTL SSL TH (V417 ONLY) UWM
50. Seeder
Accurate seed placement and adjustable metering make the seeder a valuable attachment. The application rate is more than 2 acres per hour. Rear rollers cover the seed. The seeder mounts to the front of a loader, Toolcat™ utility work machine, telehandler compact tractor or 3-pt. on Toolcat 5610 and CT models.
• 4-bushel hopper • 72-in. seeding width • Variable seeding rate • Optional Bob-Tach®
50
51
51. Silt Fence Installer Resolve erosion control issues easily and economically with the silt fence installer. It allows you to eliminate digging by hand or trenching.
• Four mounting frames allow for quick change between 3-point and Bob-Tach attachment mounting system
• Side-shift option — get close to obstacles
Compatible Equipment CT CTL SSL
52. Snow Blade
Remove light or moderate snow before it gets compacted on sidewalks, driveways and parking lots. Use the End Wing Kit to convert some models into a snow pusher.
• Five standard-duty models: 54, 60, 72, 84 and 96 in.
• Three heavy-duty models: 86, 96 and 108 in.
• Three front-mounted snow blades available for compact tractors (lift kit required): 54, 69 and 84 in.
• Adjustable depth shoes
• Strong, long-lasting cutting edge
• Rubber and polyurethane cutting edges available
• Hydraulic cylinders angle the moldboard left or right 30 degrees
attachment
mounting system allows for use on loaders, V417 or Toolcat machine
Compatible Equipment CT CTL SSL (V417 ONLY) UWM
CT (Compact Tractor) CTL (Compact Track Loader) MTL (Mini Track Loader) MX (Excavator) SSL (Skid-Steer Loader) TH (Telehandler) 54 WORKSAVER BobCatalog 2012
Compatible Equipment CT* CTL MTL SSL TH (V417 ONLY) UTV UWM
* Requires front auxiliary hydraulics.
ATTACHMENTS
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60