1. Angle Broom


Effi ciently sweep driveways, sidewalks, jobsites, parking lots, loading docks and warehouses. Clear light snowfalls, too.


• Three widths: 48, 68 and 84 in.


• With fi ngertip controls, hydraulically angle the 68- and 84-in. models


• Easy-to-replace poly bristles (steel also available)


Compatible Equipment CTL MTL SSL TH UWM


2. Auger


Fast and accurate digging makes the Bobcat®


auger ideal for


installing fence posts, planting trees or digging footings for new decks. A smaller drive housing unit allows the entire drive to follow the bit into the hole, adding a foot more dig depth than a standard drive.


• Six models available (including PTO model)


• Drills 6- to 42-in. holes


• Unique knuckle-joint design helps ensure plumb-line accuracy


• Patented combination output shaft can use hex or round bits


• Two dedicated hex shaft models


• Large variety of bit and teeth designs for varying ground conditions


Compatible Equipment CT CTL MTL MX SSL TH UWM


NOTES: Only the model 10 auger equipped with light-duty bits is approved for use with mini track loaders. The model 10 auger is approved for front-mount use with select compact tractors and front auxiliary hydraulic option (CT440, CT445 and CT450).


3. Backhoe


Hook up the backhoe to effi ciently and economically complete landscape installations, underground utilities, septic systems and countless other excavating applications.


• Digging depths from 6 to 11 ft. • Bucket widths from 9 to 39 in. • Excellent down-hole visibility • Easy to transport


• Optional rear stabilizers and street pads available


Compatible Equipment CT CTL MTL SSL


5. Bale Fork Move and load round, uneven or square bales with this handy farm attachment.


• Bale fork length: 40.8 in.


• Two small-diameter forks penetrate the material to stabilize it


• Mounts to standard or heavy-duty pallet fork attachment frame


Compatible Equipment CTL SSL TH (V417 ONLY) UWM


6. Bale Handler Effi ciently load round bales onto a trailer or into a bale feeder with a telehandler equipped with this attachment.


• Operating capacity: 2000 lb. • Spike length: 49 in. • Tapered, bolt-on spike


Compatible Equipment TH


7. Bale Squeeze The hydraulic left-hand arm retracts to tightly clamp onto various sizes of bales for easy movement with a Bobcat telehandler.


• Overall width with arm fully extended: 85 in.


Compatible Equipment TH


8. Boring Unit


Use the boring unit for placing electrical, telephone and television cables, and fl exible water pipe for sprinkler systems under driveways, sidewalks and other obstructions with minimal surface damage.


• Three operating positions • 36 in. wide


• Bore as deep as 2 ft. below the ground surface and as far as 30 ft. horizontally


• Tool kit available with various sizes of bits, reamers and rock heads


Compatible Equipment MTL SSL


9. Box Blade Two versions of the 84-inch box blade deliver accurate grading for fl atwork contractors. The laser-guided box blade has a grade accuracy of ± 0.25 inches, making it ideal for precise fi nishes. The unit without the laser-guided system is designed for rough grading and landscaping.


• Foam-filled tires for added flotation


• Fingertip control of blade raising and lowering function


• Attachment Control Kit required for laser control system


Compatible Equipment CTL SSL UWM


9 7 8 5 6 3 4


4. Bob-Tach®


Backhoe


Use this economical — and productive — option for excavating with your Bobcat loader.


• 6-ft. digging depth


• Three bucket widths: 13, 16 and 20 in.


• Optional street pads available


• Dipper swings left or right 48 degrees to dump spoil without moving the loader


• Connect with the Bob-Tach attachment mounting system


Compatible Equipment CTL SSL


1 2


UTV (Utility Vehicle) UWM (Toolcat Utility Work Machine)


Visit www.MyWorkSaver.com/attachments or your local Bobcat dealer for specifi c model information. WORKSAVER BobCatalog 2012 49


ATTACHMENTS


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60