PRODUCTS Keeping it compact
FDB Panel Fittings says that its new IP65 1071 compression latch is especially compact, offering an unusually low profile of only 22mm in its open condition and yet providing 3mm of compression.
with quiet and secure fastening. Operation is by a ¼ turn which will latch the cam in position, followed by a further ¼ turn which completes the 3mm compression cycle. The pre-assembled 1071, together with rigid H section cam, may be quickly and toolessly installed in doors of up to 2mm thickness.
T T
bigHead JackNut® sandwich panels
fixing for
On a recent major project bigHead was tasked to come up with a secure fixing for large sandwich panels to be used in a suspended ceiling.
he client needed the installation to be quick and simple and, due to the materials and processes involved, wanted to avoid the use of adhesives. bigHead came up with the bigHead® The bigHead® – JackNut®
– JackNut® concept. combination solves the specific problem
of how to fix to a single skin of a sandwich panel without adhesive bonding. bigHead explains that the fixing can spread applied loads onto a very thin substrate (3mm thick) and can be installed with access from one side only. bigHead highlights that combining its technology with that of the JackNut® offers the following benefits:
• Installed from one side of the panel. • No adhesive bonding. • Fastens into blind holes. • Fastens securely despite burrs or uneven substrate.
• Hole size tolerant. • Provides large ‘open-side’ bearing area. • Provides large ‘blindside’ bearing area. • Will not distort or deform soft plastics or thin sheet. • Accommodates a wide grip range. • Set with manual or pneumatic tool.
Elesa has a handle on it
Elesa points out that its new CLT latch/handles particularly suit large standalone or suite style cabinets with single point closure – or in conjunction with the CAR rod controls for 2 or 3 point locking.
The CLT latch/handle itself is sealable to IP65 and so is suited to most commercial/industrial cabinet applications. The CLT latch is available with a varied
E
selection of locking possibilities, through many key lock number possibilities to a double winged key type. Rod controls to complement the CLT handle are available with either 100mm or 200mm flat rods to interface with rod extensions which may be supported by black technopolymer rod guides. Handle fitment is via two off standard 50mmx25mm rectangular punchings.
Standard Listed – you know who’s best! But contact us for all the rest . . .
Tel: +44 (0) 117 – 972 8560 Fax: +44 (0) 117 – 972 8570 Email:
sales@avonstainlessfasteners.co.uk
Non-preferred Metrics – Intermediate Sizes Short and Long Lengths – Slotted Grub Screws A4/80 Bolts & Socket Caps – 6 Lobe (TX) Drive Screws All Metal Self-Locking Nuts – Studding Connectors And many more . . .
Online Product Guide:
www.avonstainlessfasteners.co.uk Unit 10, Riverside Business Park, St Anne’s, Bristol, BS4 4ED, UK
lesa explains that this spreads the gasket pull-down loads across the door so ensuring optimal sealing and security on control cabinets and electronic racks.
his enables the benefits of compression lock technology to be achieved in situations where space is at a premium – such as vehicle applications or where an interior panel or other equipment requires clearance from the lock cam. The 1071 provides IP65 sealing and vibration proof operation in LH or RH orientation
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156