Mounts & Rack Options - A/V Receivers - HDMI Components
WMS Series – Furniture Side Wall Mount Shelf NO-WMS1614DC (WMS1614DC) • Dark Cherry
NO-WMS1614GS (WMS1614GS) • Graystone
NO-WMS1614MP (WMS1614MP) • Maple
• Rounded outside corners for safety • Easy to install
• Standard colors are dark cherry, graystone and maple (shown) – other finishes and custom sizes also available
• Hold items up to 18” wide and 15” deep with room for cables
• 20-1/4” wide, 18-1/2” deep, 9” tall • 100 lb. weight capacity
HDMI Econo Plus Extender Kit 5M-500401 (500401) • Extend HDMI equipment via two (2) Cat5e/6 cables • HDMI 1.3 • Up to 150 ft. (45m) @ 1080p via Cat5e • Up to 90 ft. (27m) @ 1080p Deep Color via Cat6 • Powered on the receiver side • No adjustments required
• May be used with MuxLab mounting accessories (5M-500900, 5M-500902, 5M-500910, 5M-500915)
HDMI over Cat5e/6 SL-MVEAH010Q (MVE-AH010Q)
• Uses inexpensive Cat5e/6 cable to transmit video & audio in HDMI format as large as 1080p up to 196' (60m) over 2 Cat5e/6 cables
• Digital audio & video signals are amplified for superior picture & sound
• Built-in equalization circuitry eliminates feedback & interference
• Conforms to HDMI 1.3 & HDCP 1.1 standards. • 5VDC power supply included SL-MVEAH02Q • HDMI over single Cat5e/6, up to 164' (50m) at 1080p
Point-to-Point HDMITM VO-HDMIC5IR
& IR/CAT5 Extender
• The Xantech Point-to-Point HDMI Cat5 Extender increases the distance of your HDTV display up to 120' away from your HDTV source using two Cat5 cables
• Automatic compensation corrects skew and delay, a plug-and-use installation
• IR receiver and emitter compatible; Control HD components from a remote location
• Supports 1080p, 1080i, and 720p resolutions
Decora HDMI & IR/CAT5 Extender VO-HDMIC5IRD • Fits in Standard Decora®
Plate
• The Xantech Point-to-Point HDMI Cat5 Extender increases the distance of your HDTV display up to 120' away from your HDTV source using two Cat5 cables.
• Automatic compensation for cable skew and delay, a plug-and-use installation.
• IR receiver and emitter compatible; Control HD components from a remote location
• Supports 1080p, 1080i, and 720p resolutions RF Distribution Amplifiers
CS-DA-8200BID (DA-8200BID) – Bi-directional RF Distribution Amplifier with 5 Volt IR
CS-DA8200HHR (DA-8200HHR) – High-headroom RF Distribution Amplifier with 5 Volt IR
CS-DA550BID (DA-550BID) – Bi-directional RF Distribution Amplifier with 12 Volt IR
CS-DA550HHR (DA-550HHR) – High-headroom RF Distribution Amplifier with 12 Volt IR
CS-H838BID (H838BID) – Bi-directional Video Hub with 5 Volt IR
CS-H838HHR (H838HHR) – High-headroom Video Hub with 5 Volt IR
RF Splitter/Combiners • 1 GHz bandwidth
• Split Cat5 or antenna signals • Combine Cat5 or antenna signals
Add 25 to order number for 25-pack
CS-2512 (2512) – DC and IR Passing 2-way Splitter/ Combiner
CS-2514 (2514) – DC and IR Passing 4-way Splitter/ Combiner CS-2532 (2532) – Two-way Splitter/Combiner CS-2534 (2534) – Four-way Splitter/Combiner CS-2538 (2538) – Eight-way Splitter/Combiner
To serve you better, ADI has more than 100 convenient locations throughout the United States, Canada and Puerto Rico!
Signal Safe IEC Power Cords NO-IEC Series (IEC Series)
Signal-Safe™ IEC Power Cords replace the standard power cords provided with electronic components, and are available in multiple sizes, with standard or low profile, 90° angled plugs.
• Eliminates slack and loops caused by long power cords • Constructed of 14 gauge wire or 18 gauge wire (cable/satellite cords) • Available with blue or NEW red stripe to identify different circuits • Signal-Safe™ design incorporates twisted wires to minimize disruptive AC magnetic fields • Multiple length cords available to meet the needs of each situation • Also available for use specifically with most satellite and cable boxes • UL listed in the US and Canada
106 For Orders, Call: 1-877-234-7378 |
www.adiglobal.com/ca Single Output RF Amplifier
RF Amplifier CS-DA500A (DA-500A) • 18dB nominal gain • 50 MHz–1 GHz bandwidth
Bi-directional RF Amplifier
CS-DA520A (DA-520A) • 20dB nominal gain • 54 MHz–1 GHz forward bandwidth • 5 MHz–40 MHz reverse bandwidth • BID units for bi-directional use with digital cable interactive set-top boxes. • HHR units for antenna applications for off-air digital and NTSC signals
Audio/Video
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140