This page contains a Flash digital edition of a book.
SPORTING CANOES


Trolling for Lake Trout


Whether you’re passing time on a rest day or scrounging for your next meal, fishing for lake trout is a fun activity on any canoe trip. The small, deep, remote lakes paddlers love are also home to some great wilderness fishing. Thirty-year veteran guide Gary Skrzek shares his canoe fishing methods.


TROLLING IN A CANOE


Begin with the bow person sitting facing backwards. While the stern person paddles, the bow person drops a line to the desired depth. Next, the bow person puts the fishing rod down and paddles backwards while the stern person drops a second line. Once both lines are at the desired depth only the stern person needs to paddle. Keep the canoe moving or the two lines will get tangled with one another or snagged on the bottom.


Some tips for successful trolling from a canoe: • Move the canoe just fast enough for the lure to work. Any faster and it will be hard to keep your lure at the proper depth.


• On most reels, reeling backwards 50 cycles lets out around 53 feet of line. When fishing for summer lake trout, you want to stay in the 40- to 55-foot range.


• Try to troll along drop-offs or around shoals and islands that are next to deep holes.


• When a trout bites your lure, you need to set the hook hard.


• Trout like small lures. Expect to catch 20-pounders on lures smaller than your thumb.


TACKLE


The traditional method of trolling for lake trout uses steel wire and thick heavy rods, but these are best replaced with thin line and a light action rod for two reasons. First, this setup is much easier to bring on remote wilderness canoe trips. Second, it can be difficult to sense depth with steel wire so snags are common. When a snag can’t be freed, the line must be cut at the canoe leaving a 200-foot coil of steel wire in the lake. All too often loons, fish and mammals get caught in this tangled mess.


52 SPRING 2011


BUILDING A THREE-WAY SWIVEL RIG: » Tie two lines to a three-way swivel, one about 20 inches long and the second 23 inches.


» Tie your sinker to the 23-inch line. Feeding lake trout will stay in the 40- to 55-foot range during the summer so a two-ounce weight is adequate. The sinker line is a little longer so your lure stays off the bottom if you get a snag.


» Tie your lure to the shorter line. Small, feather-light spoons that are silver or silver mixed with blue, green or pink work best.


MAKE’ER A LAKER! PHOTO: JAMES SMEDLEY


You can catch many meals worth of trout with this friendlier light


tackle setup. While trolling, thin line has very little friction in the water. This allows line to drop almost straight down, minimizing the amount of line out. With a two-ounce weight, a light action rod is more than strong enough and setting the hook is also easier because you can feel the fish strike the lure. Most of all, reeling in a lake trout on light action equipment is loads of fun!


WHAT YOU NEED


All you need to catch lake trout from your canoe is a light action fishing rod, six-pound- test fishing line, a three-way swivel, a two- ounce weight and a lightweight trout spoon.


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64