ATTACHMENTS AND IMPLEMENTS


57


58a


58b


58c


59 57 SPRAYER


Attach the sprayer to a ToolcatTM 5600 utility work machine or a compact tractor or utility vehicle, and it’s ready for a wide range of chemical applications. Use it for spot weed control and broadcast spraying of liquid fertilizer and chemicals. In the winter, use it to apply liquid ice-melting solution.


• 40-gal. tank fits Toolcat 5600 and utility vehicles


• 60-gal. tank available for compact tractors


• 75-gal. tank available for Toolcat 5600


• Boom height adjusts to match height of vegetation


• Hand wand makes easy work of spot spraying


Compatible Equipment CT UTV UWM


58


A. SP5 SPREADER Spread dry, free-fl owing granular materials such as seed, fertilizer, sand and salt with this effi cient attachment.


• 5.75-cu.-ft. capacity hopper • Spreads from 4 to 40 ft. • Weather-tight motor enclosure


Compatible Equipment CTL SSL


58


B. HS8 HYDRAULIC SPREADER


• 9.6-cu.-ft. capacity hopper • Spreads from 18 to 28 ft. (depending on carrier’s hydraulic flow)


• Optional sidewalk kit reduces width of spread pattern to 29 or 37 in.


Compatible Equipment CT CTL SSL


60 59 58


60


C. SP12 SPREADER With a snow removal attachment on the front of a Toolcat 5600 and this spreader model on the back, you can clear snow and spread salt or sand at the same time.


• Corrosion-proof, all-poly construction


• Dash-mounted control adjusts auger and spinner to spread material from 5 to 40 ft.


Compatible Equipment UWM


STEEL TRACKS Diffi cult ground conditions — whether muddy, rough or rocky — are easier to overcome with Bobcat over-the-tire tracks on your skid-steer loader. Install them in less than 30 minutes; remove them in 10 minutes.


• Dual-induction hardened pads and traction bars provide exceptional traction and durability • Heat-treated replaceable and reversible bushings and links increase reliability and service life


• Smooth, generous contours won’t cut or damage tire sidewalls


Compatible Equipment SSL


STUMP GRINDER Use this powerful grinding machine to quickly remove an entire tree stump without repositioning your loader. Visibility to the cutting area is excellent.


• Three models • Unique valve design prevents UWM (Utility Work Machine) VH (VersaHandler TTC) 62


cutting wheel from stalling in the cut


• Rubber deflecting shields and screening provide additional operator comfort and protection from wood chips


Compatible Equipment CTL MTL SSL UWM


61 SWEEPER


Sweep, collect and dump dirt and other debris with this single attachment. The sweeper can be operated going either forward or reverse as you clean construction, industrial and municipal sites. The optional gutter brush allows the operator to clean curbs, drainage ditches and hard-to-reach areas.


• Seven models: 36 to 84 in.


Compatible Equipment CTL MTL SSL UWM VH (V417 ONLY)


THREE-POINT HITCH ADAPTER


Use Category 1 and 2 implements that meet ASAE standards for quick-hitch with your Bobcat loader or Toolcat™ machine. Hook it up with the Bob-Tach™ mounting system. A 2-inch receiver allows you to tow a trailer.


Compatible Equipment CTL SSL UWM


64 63 63 TILLER


Easily and effi ciently break up clumps, till and mix soil and compost materials with the tiller attachment. Offset mounting enables you to till next to sidewalks, curbs and buildings.


• Three widths: 38, 62 and 76 in. • Three hydraulically driven models with no shear pins to maintain • Bi-directional rotation for top- cutting and under-cutting in either direction


• Hardened, double-edge replaceable tines


• Three models of 3-point tillers available for compact tractors and the Toolcat 5610


Compatible Equipment CT CTL MTL SSL UWM VH (V417 ONLY)


TILT CARRIAGE Working on uneven terrain with a telescopic tool carrier is much easier when using the tilt carriage attachment. You can pick and place pallets from truck beds, scaffolding and rooftops by leveling the tilt carriage to align with the angle of the pallet.


• Two sizes: 48 and 60 in. • Oscillates 15 degrees right or left


Compatible Equipment VH


Visit www.MyWorkSaver.com/attachments or your local Bobcat dealer for specifi c model information. WORKSAVER BobCatalog 2011 53 64


61


62


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54