ATTACHMENTS AND IMPLEMENTS


7


8


9


10 7


BALE SQUEEZE Move various size bales — from large square to stacks of smaller ones — with this attachment for VersaHandler telescopic tool carriers. The hydraulic left-hand bale squeeze arm retracts to clamp onto bales.


• Overall width with arm fully extended: 85 in.


Compatible Equipment VH


8 BORING UNIT


This loader attachment is perfect for installing electrical, telephone and television cables, and fl exible water pipe for sprinkler systems under driveways, sidewalks and other obstructions with minimal property damage.


• Three operating positions • Bore as deep as 2 ft. below the ground surface and as far as 30 ft. horizontally


• Tool kit available with various sizes of bits, reamers and rock heads


Compatible Equipment MTL SSL


9 BOX BLADE


For best-in-the-business grading results, Bobcat has two 84-inch- wide box blade versions. Add the laser control system to improve grading to an accuracy of ± 0.25 inches. The box blade without the laser control system is operated by switches mounted on the loader’s steering levers for fi ngertip control. Use it for rough grading and landscaping applications.


• Foam-filled tires for added flotation


10


11


• Fingertip control of blade raising and lowering function • Attachment control kit required for laser control system


Compatible Equipment CTL SSL UWM


BRUSHCAT™ ROTARY CUTTER The fast and easy way to complete diffi cult brush-clearing jobs is with the heavy-duty rotary cutter. It mulches trees and saplings up to 3 inches thick and cuts through the thickest brush and grass. The fl otation linkage enables the deck to fl oat over ground contours to maintain surface contact.


• Five models


• 60- and 72-in. cutting widths • 2-in. cutting height • Double-edged blades for double the life • Cuts in forward or reverse • Automatic blade shut-off device


Compatible Equipment CTL SSL UWM VH (V417 only)


11 BRUSH SAW


Remove unwanted brush and small trees up to 15 feet tall with the 28-inch, high-tensile steel blade on the brush saw. The brush saw can cut slightly below ground level to reduce stumps often left by tree shears. Cut beyond the mounting frame of the saw when angled to the left.


• High-torque, low-speed motor • Three boom-angle positions • Special Applications Kit required


Compatible Equipment CTL SSL


UWM (Utility Work Machine) VH (VersaHandler TTC) 12 BUCKETS


(FOR LOADERS, UTILITY WORK MACHINES AND UTILITY VEHICLES)


The best buckets in the business are made by Bobcat. In addition to the largest selection available, longer lasting Bobcat buckets are designed to be the perfect match for your power unit. Bolt-on teeth and cutting edges available for most buckets


Construction/Industrial (C/I). High carbon steel cutting edge, side cutting edges and a channel design that provides extra strength and durability. A bolt-on grapple can be attached. Heavy- duty and severe-duty versions available.


Combination (see listing #17). Dirt. Good cutting edge visibility and excellent bucket breakout force for better digging and easier bucket fi lling.


Fertilizer and Grain. Greater roll-back feature allows you to move large amounts of granular material with minimum spillage.


General Purpose. With a longer bottom than the dirt bucket, the general purpose bucket is the ideal choice for light-duty grading, leveling and material handling.


Light Material. Large-capacity bucket is just right for handling snow, mulch and other low- density materials. High-back design is ideal for pushing and straight sides for penetrating piles.


Low Profi le. Similar to the C/I bucket but with a longer bottom. A good choice for grading, leveling, carrying and loading materials. Add a bolt-on grapple attachment for more versatility.


12


13


Rock. Collect rocks while leaving soil behind. Four heavy-duty models: 62 to 84 inches wide.


Utility. The 60-inch model is an excellent choice for handling a variety of materials.


Compatible Equipment CTL MTL SSL UTV UWM


13


BUCKETS (FOR EXCAVATORS) Several bucket options are available to match your Bobcat excavator to your job. The X-Change™ attachment mounting system allows you to use comparably sized buckets on both Bobcat excavators and Bobcat backhoe attachments.


Trenching. Choose from several types and sizes: 8- to 20-inch- wide pin-on models, 13- to 36-in. standard duty X-Change or 12- to 36-in. severe duty. The X-Change buckets feature scalloped side plates for improved digging performance and reversible, bolt-on side cutters and replaceable teeth.


Grading. Three sizes of Bobcat excavator grading buckets (39-, 52- and 54-inch widths) are ideal for fi nish grading, backfi lling and ditch cleaning.


Tilt Grading. This 48-inch-wide bucket is designed for use with the E80 excavator. Use it to shape holes and ditches by tilting left or right 40 degrees.


Compatible Equipment MX


Visit www.MyWorkSaver.com/attachments or your local Bobcat dealer for specifi c model information. WORKSAVER BobCatalog 2011 47


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54