WALL THIMBLES/FIRE STOPS Adjustment between stop plates 4” to 7-1/2”.
CAT. NO. MFG. NO.
5H172MW 6TGWFSP 6” 6M911
8TGWFSP 8”
SIZE EACH $73.23 $84.06
ADAPTER STARTER SECTION
The single wall adapter is used to provide tran- sition from single wall or double wall pipe to Temp/Guard® chimney pipe.
CAT. NO. MFG. NO. 5H030M 5H201M 5H202M
8TGPSWA 6TGPSWA
VENT SIZE EACH 8” 6”
10TGPSWA 10”
$70.94 $61.96 $65.72
ATTIC INSULATION SHIELDS
Must be used anytime the chimney system passes through an attic. Required on all attic pass-through situations, regardless if insulation is present or not.
CAT. NO. MFG. NO. VENT SIZE EACH 5H029M 5H174M 5H203M
6TGIS 8TGIS
10TGIS
6” 8”
10”
$114.00 $134.45 $125.85
ALUMINUM PITCHED ROOF FLASHINGS Fits roof pitch from 2/12 to 10/12.
This spark arrester cap also gaurds agains rain, snow and downdrafts. Overall height is 11 1/2”.
CAT. NO. 5H173SM 5H171SM
MFG. NO. VENT SIZE EACH 8TGC 6TGC
8” 6”
4G7267SM 10TGC 10”
$140.77 $105.92 $168.90
$18.77 $26.55 $29.02
11 3/4” $79.98 11 3/4” $118.40 11 3/4” $103.66
ADJUSTABLE WALL SUPPORTS STAINLESS CASING
The adjustable support enables adjustments in clearance to combustibles from 2” to 6”.
CAT. NO. MFG. NO. SIZE EACH 5H204M 6M915
6TGAWS 6” 8TGAWS 8”
$131.90 $148.23
WALL SUPPORT/ADAPTER STAINLESS STEEL CASING
This fixed spacing wall support is designed for use with the insulated tee to provide support for the chimney which has a lateral connection passing through the combustible wall. Support allows access from below to tee cap. The maximum height of chimney which may be supported is 60 feet.
CAT. NO. MFG. NO. SIZE 5H206M 6TGWS 6”
ROOF BRACES
The roof brace kit includes support band, two braces, and mounting feet. Required when more than 4 feet of chimney extends over the roof.