SPONSORED: OPTICAL COATINGS
counts Gemma Church finds out how a new generation of optical coatings can provide superior reflectivity in the deep UV range and beyond
T
he wavelength of light imposes a limit on the smallest feature that can be
imaged or resolved. With sensor technology
evolving rapidly as mobile phones and other consumer products offer cameras with greater than 10 megapixels (MP) image size, researchers are taking advantage of this rapid growth in resolution and sensitivity and extending their optical systems to shorter wavelengths, shifting away from the visible spectrum and into the short-wavelength ultraviolet (UV) region. With the commercialisation of UV LEDs, UV security features on banknotes and credit cards, advancements in DUV Raman and UV fluorescence, new applications are continually being discovered. As sensor technology has
evolved, it has also become smaller, increasing the need for higher throughput to increase photon sensitivity and maximise signal-to-noise ratios for benchtop and hand-held instruments that are being developed today. As part of this drive to increase throughput, high reflectivity optical coatings in the UV and especially the DUV have become increasingly important in scientific instrumentation. The DUV region occupies
wavelengths between 280 and ~200nm. This is an established range in which many instruments have been operating for decades. However,
36 Electro Optics November 2022
now growing in popularity with scientists and researchers are even shorter wavelengths in a region below 200nm known as vacuum UV (VUV). This VUV region gets its name from the fact that wavelengths below 190nm are strongly absorbed by oxygen in the atmosphere, and thus cannot be transmitted. A vacuum or nitrogen purge environment is required for these systems to operate. Technically speaking, the VUV region goes down to X-ray level energies, but practically speaking it is commonly recognised from 200 to 100nm.
Journey into space Selective molecular imaging is now being used, not just on Earth, but to identify novel compounds and specific mineral elements in remote locations, including our Sun as well as far-flung stars and planets. Chemical analysis is another emerging application area, where optical systems must operate in the DUV and VUV regions and in potentially hazardous environments. However, these DUV and VUV optical systems are prone to suffering from low overall throughput, which is a significant problem for end-users. The sensitivity of the optical systems must be improved to unlock these applications and successfully image in the DUV and VUV regions.
This is where the right optical
coating can help to mitigate these losses and maximise the sensitivity of the system.
Every photon
Coating Chamber: SSI now has the capabilities to produce aluminium, gold and custom optical coatings with high reflectivity
Reflectivity and low scatter are critical factors for the end-user to take into account. There are a limited number
of potential coating materials capable of transmitting VUV wavelengths. When working above 200nm, metal oxide compounds are a popular choice, with SiO2
both transmitting at around 225nm. But, as we move to shorter wavelengths, absorption limits the transparency and laser damage-resistance of oxide coatings, and various fluorides with good transmittance are chosen. When we move down to the sub-200nm VUV range, then the choice and capabilities of optical coatings further reduces.
and Al2 O3
Meeting challenges This was the challenge that Spectrum Scientific, Inc (SSI) tackled head-on when a customer needed a system to operate at the 120nm wavelength a few years ago. David Cook, General Manager at SSI, explains: “We originally started looking outside to other
suppliers to see if we could get some vacuum coatings for our optics in this range. But we quickly realised there were very few people out there capable of providing adequate vacuum UV coatings. Although we’re not a coating company per se, we started to develop VUV reflective optical coatings because of this gap in the market.” SSI now provides a range of
vacuum UV optical coatings, which work between 120 and 200nm, providing superior reflectivity, according to Cook, who adds: “In terms of reflectivity, our coatings are around 10 per cent higher than the other coatings that we’re aware of on the market.” These optical coatings
are used on a wide range of components, which SSI has been manufacturing since 2004. These include high-volume flat, aspheric and freeform reflective optics, hollow retroreflectors and holographic diffraction grating.
The company primarily
uses the industry-established optical replication process to manufacture these parts, which allows them to supply high-fidelity, high-specification precision optics at a lower cost compared to traditional volume
@electrooptics |
www.electrooptics.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58
