Products PRODUCTS


More products now online at www.imveurope.com/products


Lenses Complete vision systems


TM-X5000 telecentric measurement by Keyence Keyence has introduced a range of inline telecentric measurement systems employing advanced silhouette-based analysis. Designed to measure parts rapidly and


consistently as they pass through the system, the TM-X5000 boasts an exposure time of 25μs. It provides a versatile solution for a broad spectrum of industrial measurement applications, offering geometric dimensioning and tolerancing; outer diameter and profile measurement; abnormality detection; and runout and positioning. Te telecentric optics improve measurement


Fujinon releases HF-XA-1F series Fujifilm has released a series of industrial lenses designed to withstand shocks and vibrations. Te Fujinon HF-XA-1F series is suitable for image sensor sizes from 2/3 inches to 1/1.2 inches, and resolutions up to 5 megapixels with 3.45µm pixel sizes. Te HF-XA-1F series carries over the


optical design and performance of the HF-XA-5M lenses, but with Fujifilm’s anti- shock and vibration technology, along with a mechanical design with no moving parts inside the lens. Te lenses give low distortion and


consistent image sharpness at the edges, even with a short minimal object distance (starting at 100mm), as well as consistent image quality regardless of the object distance. Te focus is adjusted with a special


C-mount and its nut and counter-nut system: the user attaches the lens to the camera by turning it into the C-mount thread until the correct focus is achieved. Tis position is then locked using the mount nut on the lens. In this way, the lens is adjusted to the sensor without moving optical glass parts inside the lens. Similarly, the iris is fixed to avoid moving


parts. Users can adapt the iris to their needs by exchanging the fixed iris plate. Tree different plates are provided with every lens: F open, F4 and F8. Tey can be exchanged by the user and are screw-locked to ensure they can withstand heavy shocks and vibrations. Fujifilm has tested the lenses by applying


forces of up to 10G in six directions and measuring the shift of the optical axis after the test. Te range includes five models with 8 to 35mm focal lengths. www.fujifilm.com


repeatability by increasing uniformity throughout the field of view. Te dual telecentric silhouette- based system provides stability, while the large ±15mm depth of field, based on telecentric lenses in both the transmitter and receiver, provides clear, sharp edges and stable measurements, even where the target position varies. An optical alignment function enables rapid,


simple installation, while the user interface features a wide variety of measurement tools. Te range has three models: the compact, ultra-


high accuracy TM-X5006; the standard TM-X5040; and the TM-X5065 for wide field applications. www.keyence.co.uk/tmxrelease


Computing


New FantoVision 20 embedded computer Gidel has introduced a small and robust embedded computer for high-throughput image acquisition and image processing. FantoVision 20 can carry out image processing, compression and recording of video streams with up to 20Gb/s in real time. Te computer is equipped with two 10GigE


and Camera Link 80-bit (deca) connections. Its architecture combines an Nvidia Jetson Xavier NX embedded computer with an Intel Arria 10 FPGA. Tis gives high-end frame grabbing with real-time AI and image processing. Algorithms are programmed using C/


C++, Cuda and Nvidia’s AI, image processing and compression libraries. Te FPGA offers pre-processing and compression capabilities. Using multiple FantoVision 20s and Gidel’s open-FPGA InfiniVision acquisition flow, more than 1,000 camera streams can be captured and synchronised simultaneously.


38 IMAGING AND MACHINE VISION EUROPE AUGUST/SEPTEMBER 2021 Te computer has a 134 x 90 x 60mm3 form


factor and the hardware is designed to operate under industrial conditions. Passive and active cooling options are available. Using a 10Gigabit Ethernet switch, multiple GigE cameras can be networked for 360° inspection or 3D scanning. Potential applications include high-speed


inspection, intelligent transportation systems, broadcast, medical devices, agriculture and aerial mapping, among others. www.gidel.com


@imveurope | www.imveurope.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44