scanning… We want to do the same for triangulation’


‘Solid-state MEMS lidar has brought higher speed and higher quality


then scan the critical features of the part in high resolution at a precision of 10µm. ‘We scan each critical dimension in such a way as to get very accurate boundaries,’ Shulman explains. ‘Tis is done by optimising the scanning pattern according to the feature’s specific properties.’ To scan in different directions requires


different camera positions, with the image reconstructed by combining profiles from different scans. Tis system can operate in different configurations, from one to four cameras. Tis is, firstly, to get views from


www.imveurope.com | @imveurope


different angles, and secondly, the camera needs to be positioned perpendicular to the laser line to make the scan. In another project, vision integrator


Integro Technologies is developing an inspection system using the Saccade scanner. Te manufacturer with which Integro is working has challenging requirements, including scanning at precisions of 10µm for some sections of an aluminium mould in high- volume production. Te customer wanted to perform 100


Seeing Light In a Whole New Way


g FLEXPOINT® machine vision lasers


manufactured to your needs. www.lasercomponents.co.uk


Supergenijalac/Shutterstock.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44