Artificial intelligence


Bosch to cut engineering cost with AI


Wolfgang Pomrehn, collaborative robotics product manager at Bosch Rexroth, says deep learning could reduce the engineering effort of introducing new products to a manufacturing line by three quarters


B


osch is building an image database of typical parts made by the firm in order to train neural networks. Te idea is to use


artificial intelligence to lower the engineering effort needed to run inspection systems. Bosch has about 270 production plants. Te


company manufactures many different parts, some of which have similar features. In the automotive sector, for example, Bosch makes a lot of parts used in combustion engines that look alike. We’re trying to create a database of images of those parts, so that if a new component is introduced that falls in a certain product category with slight variations, you immediately have a quality inspection system able to recognise the defects usually found on these types of part. A sensor element designed to measure the


of this figure by using deep learning. Te range would then roughly be €7,000 to €40,000. An inspection system looking at the quality of


To get a robust


system, we need many hundreds of terabytes of images – the more the better


amount of oxygen in the air sucked into an engine, for example, will have a complex form consisting of four or five different components assembled together – it has a complicated surface made up of metal and plastic parts. To inspect this sensor completely would require a check made on 20 different characteristics, which would need a set of 10 cameras, for instance, with 20 different illumination settings. To integrate this in a running production line involves implementation costs, depending on the complexity, of between €50,000 and €250,000. Engineering would account for between €25,000 and €150,000 of this cost. We plan to reduce the engineering cost to a quarter


QR codes and printed text, for example, should have quality criteria built into the analysis, rather than having to tune a code reader to find defects in dot codes for each batch. Bosch is collecting image data to train inspection systems to do this, along with looking at defects such as text reading, scratches on metal, bubbles in plastic, and incorrectly mounted O-rings. New products appear


in shorter timeframes. Tis involves a lot of costly engineering in order to introduce new products on existing production lines. Bosch’s effort to make


machine vision systems more flexible to cope with many different product variations will not only reduce the cost of re-engineering a machine vision system for each variant, but also improve the time-to-market of new products. To get a robust system, we need many


hundreds of terabytes of images – the more the better. A lot of Bosch systems are already equipped with cameras, so we can collect image data easily, in one respect. On the other hand, deep learning algorithms need data from different scenarios – you can’t only look at data code, for example; you also need images of the entire part so that the system can locate the code on a new part from previous knowledge, and not only by focusing the camera on the


12 Imaging and Machine Vision Europe • Yearbook 2019/2020


@imveurope


www.imveurope.com


right spot. Terefore, a lot more different views of the object are needed, which involves additional effort to collect data. Another challenge is that in highly


sophisticated production lines like those found at Bosch, defects could occur only once in a million parts. If you want to detect defects, you need data on those defects, but very few defective parts are produced. Without sufficient data, we’re focusing on another kind of deep learning algorithm able to find deviations in images of the good parts. Tis is part of our research: collecting images of good parts and asking the vision system to detect defects. We’re focusing on getting the images,


labelling them, and optimising the system by widening the area of inspection of the parts – different parts need different kinds of imaging. Te data is collected by a mobile imaging station consisting of a robot that presents the part to a set of cameras. Labelling the images is done offline, as is training the AI system. Tere are also prototype implementations of the AI system running in practice on production lines. Tis work is part of an internal Bosch


research project based on AI and deep learning. Our group is focused on quality inspection and how to implement these algorithms in practice. We’re not at a point where we can use deep learning algorithms completely, but we are already using part of the knowledge for complicated inspection in practice. O


Interview by Greg Blackman


Bosch’s APAS assistant robot is a mobile imaging station being used to collect image data.


Bosch Rexroth


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52