More Flexibility for Packaging and Textiles – powerSCAN II


UK company APPLIED LASER ENGINEERING will exhibit its laser engraving systems used to engrave high resolution 2D and 3D graphics into the surface of cylindrical and flat substrates. Machines range from 0.6m to 7m roller length capability and up to 1m


of microstructures and for marking and labelling different materials. www.jenoptik.com/os


LASERLINE will exhibit a hybrid laser with up to 20kW output power. The hybrid high-power diode lasers combine a classic diode laser with the high beam quality of an active fibre converter laser. The lasers are designed for job shops, as well as for deep welding or additive manufacturing. The Laserline hybrid laser


combines an LDF diode laser with up to 16kW output power with an LDF converter laser with up to 4kW output power and high beam quality of 8mm*mrad. The system is based on the modular design of Laserline high-power diode lasers. It offers the following three operating modes: a classic diode laser mode with a wide spot width, a beam-optimised converter laser mode, and a hybrid mode with combined use of both beam qualities. www.laserline.de


OPHIR, part of MKS Instruments, will be showing its Beam Squared M2 laser beam propagation system. A robust, portable device, Beam Squared measures the propagation characteristics of CW and pulsed lasers in less than one minute. It can optionally measure wavelengths above 1.8µm, including CO2


and


terahertz, in manual mode. Beam Squared is designed for


continuous use applications, including


diameter. Laser type and wavelength is application or material specific. Materials processed include metals, ceramics, rubber, and natural and synthetic polymers. Engraving systems for ceramic anilox are a speciality. www.appliedlaser.co.uk


scientific research, rapid prototyping, fabrication, and machining. The system includes the Beam Squared M2 software and an optical train. The software measures beam propagation characteristics on both the X and Y axes, including waist diameters, full angle divergences, waist locations, Rayleigh lengths, M2 or K and BPP factors, astigmatism, and asymmetry. The system displays 2D or 3D beam profiles for visual verification of beam behaviour through focus. www.ophiropt.com


French firm SPARK LASERS will release its Diadem femtosecond laser. The laser produces femtosecond pulses variable from 400fs up to 10ps with an energy of 40µJ, an average power of 30W, and at repetition rates ranging from single pulse up to 2MHz. The new generation of industrial,


high-energy femtosecond laser offers a compact, robust, lightweight and air-cooled package. The laser has a two-connector interface and an intuitive graphic user interface. Pulse-on-demand, burst of pulses, gating and energy modulation can all be set by the user. For applications requiring very


precise synchronisation, such as high-speed scanners, the company offers its Ultra-Sync tool whereby laser pulses can be synchronised to any third-party to an accuracy of less than 100ps up to 2MHz repetition rate. www.spark-lasers.com


www.lasersystemseurope.com | @lasersystemsmag


3D Scan System for Industrial Laser Cutting • Designed for high-power CO2


lasers


• Smallest laser spots for perfect cutting results • FLEX option enables variable scan fi eld • Light weight mirrors for highest cutting speeds • Compact, sealed housing


Visit us at


Photonics West 2018, Booth #2025 San Francisco, CA • January 30 – February 1


www.scanlab.de


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36