Temperature Thermal conductivity UKAS
Particle Technology Ltd
Unit 1 Station Yard Industrial Estate Hatton DE65 5DU Derbyshire UK TEL: FAX:
+44 (0)1283 520365 +44 (0)1283 520412
EMAIL:
gspicer@particletechnology.com WEBSITE: CONTACT:
Greg Spicer, Managing Director
Particle Technology is one of the UK’s leading and most respected test houses. Facilities include cleanliness testing, two of the largest sand and dust testing chambers in Europe, test dust production and a high flow air filter test service according to EN 779:2012, and ISO 16890:2016. Particle Technology is accredited by UKAS (4109) for air filter testing, cleanliness testing and sand and dust testing, and operates to ISO 9001 standards.
Air filtration
Chamber – sand and dust Component cleanliness testing DEF STAN 00-35 DEF STAN 07-55 Dust Dust testing Filter testing IP testing ISO 17025 MIL STD 810 Particle contamination identification Particle size analysis Sand and dust UKAS X-ray fluorescence
www.particletechnology.com
Process Sensing Technologies
Crompton Fields Crompton Way Crawley RH10 9EE West Sussex UK TEL: FAX:
+44 (0)1293 571000 +44 (0)1293 571008
EMAIL:
uk.info@
processsensing.com WEBSITE:
www.processsensing.com CONTACT:
Richard Gee, Managing Director
Process Sensing Technologies – which includes Michell Instruments, Rotronic and Ntron – is a leading manufacturer of precision instrumentation for a wide range of critical measurement parameters including humidity, trace moisture, oxygen, CO2, temperature and differential pressure. They offer calibration services in a UKAS/ ISO 17025 accredited laboratory and a range of moisture calibration equipment including dew-point calibration systems, dryers, humidity generators and chilled mirror reference hygrometers. The cloud- based RMS provides continuous environmental monitoring.
Calibration – dewpoint Calibration – humidity Calibration – temperature Chamber – humidity Clean room validation Data logger Dewpoint Differential pressure Environmental control – humidity Environmental monitoring systems Gas – analysis Humidity
Humidity control HVAC Instrumentation Meteorology Pressure measurement Sensors – ATEX approved
Production Test Systems Limited
Unit 1 Manor Commercial Centre 12 Commercial Road Reading RG2 0QJ Berkshire UK TEL:
+44 (0)118 986 2000
EMAIL:
enquiries@p-t-s.co.uk WEBSITE:
www.p-t-s.co.uk CONTACT:
Simon Bowker Heighes, Managing Director
Production Test Systems (PTS) are a leading supplier of environmental test equipment & consumables to the semiconductor, microelectronics, aerospace, automotive & medical devices markets within the UK, Eire, Scandinavia & the EU. We offer a full sales & service solution from R&D through to final test.
Accelerated testing Aerospace testing Altitude – low pressure ASIC verification Autoclaves Automotive testing Battery testing equipment Board level reliability Burn-in Centrifuges
Chamber – altitude Chamber – bespoke Chamber – burn-in Chamber – HAST Chamber – hot and cold Chamber – humidity Chamber – laboratory Chamber – supplier new and used Chamber – thermal shock Chamber – walk in Electronics function testing
continues on page 25
www.TestHouseDirectory.com Test House Directory 2023 n 23
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68
