search.noResults

search.searching

saml.title
dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
Sign Maker Advice


Ways to store self-adhesive vinyl S


elf-adhesive vinyl is one of the most important materials in any sign making


workshop. Whether you are cutting or printing


vinyl to produce vehicle graphics, shop signage, window displays, banners or general promotional signs, keeping your vinyl in good condition is essential. Poor storage can lead to adhesive


deterioration, material distortion, edge curling, contamination and problems during application. With vinyl becoming an increasingly expensive consumable, storing it correctly can save money, reduce waste and help maintain the quality of your finished work.


Should you store vinyl vertically or horizontally? As a general rule, most vinyl should be stored vertical using suitable roll stands or end supports. If storing rolls vertically, make sure they are properly supported and cannot lean against one another or fall over. In either vertical or horizontal storage never allow the weight of the roll to rest on the exposed vinyl edge of the vinyl as excessive pressure can deform the material or damage the edges.


Keep vinyl in its original packaging Manufacturers supply vinyl in packaging designed to protect it from dust, dirt, moisture and physical damage. Removing this packaging unnecessarily exposes the material to workshop contaminants. Once a roll has been opened, keep


the remaining material protected. Replace its end caps, with those supplied and use a clean protective sleeve or suitable wrapping. Avoid using adhesive tape directly on


the vinyl itself, as this can leave residue or damage the surface when removed. Plastic roll clips are great for stopping rolls unrolling.


Temperature matters Most sign making vinyl should be stored in a clean, dry environment


| 66 | November/December 2026


at a reasonably stable temperature. Many manufacturers


recommend storage temperatures around 15–25°C, although the technical data sheet for the particular product should always be checked. Avoid storing vinyl next to


heat sources, in direct sunlight or in damp storage. Extreme temperatures can affect the vinyl, its dimensional stability and the performance of its adhesive.


Avoid damp and humid conditions Although the vinyl face material itself may be relatively resistant to moisture, its release liner and packaging can be affected by damp conditions. Changes in moisture content


can cause paper liners to expand or contract, potentially resulting in curling, wrinkling or difficulties when feeding material through a printer or cutter. Store rolls away from damp floors


and external walls. Keep them in a dry, well-ventilated room and avoid areas where condensation is likely to occur.


Keep it clean Even small particles of dirt trapped between layers of vinyl can create imperfections, while contamination on the adhesive side can compromise the finished application. Keep storage areas clean and avoid


storing vinyl close to woodworking machinery, grinding equipment or other dusty workshop activities. Before returning a partially used roll to


storage, make sure the exposed material is clean and protected. For vinyl that is to be printed on


consider using cotton gloves to stop the transfer of grease from your hand contaminating the roll.


In this issue’s Sign Maker Advice by Paul Huges, owner of Sign Making Tools, he explains the importance of storing your vinyls correctly.


Choosing the right vinyl will make a difference to your application


Don’t forget about the shelf life Self-adhesive vinyl does not necessarily last indefinitely in storage. Although many products have a


recommended shelf life of around two years under specified storage conditions, this varies between manufacturers and product ranges. The adhesive can gradually change


over time, potentially affecting its tack, bonding characteristics and application performance. A simple stock rotation system can


prevent older materials from being forgotten at the back of the rack.


The bottom line Good vinyl storage is not complicated, but it does require a little thought and organisation. Keeping rolls protected,


maintaining stable temperatures, avoiding damp conditions and rotating stock correctly will help preserve the quality of your materials and reduce unnecessary waste.


www.signupdate.co.uk


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76