The BSGA Corner
BS 559-2: From standard to practice D
Building on the introduction to BS 559 in our previous edition, the BSGA examines the practical implications of the draft inspection and maintenance standard through its new four-part podcast series, hosted by Jack Gocher of Eye on Display, with Linda Edwards, managing director of the BSGA, and Ben Lambert, director at Displayway.
epending on the installation, assessment may need to extend to
fixings, supporting structures, foundations, electrical systems and the surface to which the sign is attached, wherever deterioration could affect safety or stability. The draft proposes a risk-based
approach, with inspection informed by the sign’s type, location, age, condition, environmental exposure, accessibility and associated risks. It also proposes a minimum annual physical, onsite inspection. The third podcast examines what this could mean in practice, including the need to identify defects, record findings and determine when further investigation or remedial work may be necessary.
What could affect the inspection of a sign? The materials used in its construction, the fabrication techniques employed, its age, installation history and exposure to environmental conditions can all influence its condition and the level of inspection required. Signs showing deterioration, or where
the installation date, service inspection history isn’t known, may require closer attention.
What happens when information is unknown? The draft proposes an enhanced inspection regime where the installation date, service life or previous inspection information cannot reasonably be established. For organisations managing extensive
or ageing sign portfolios, this highlights the value of maintaining accurate records rather than relying on assumptions about the condition of existing installations. The practical challenge is to
understand what is in place, assess its condition appropriately and identify where further information or investigation is needed.
www.signupdate.co.uk November/December 2026 | 49 |
What competence is needed to inspect a sign? Relevant knowledge may include structural condition, electrical safety, working at height and site-specific risks. For sign companies, this raises an important consideration. Experience in sign manufacture or
installation does not automatically establish competence to undertake every type of inspection. Businesses considering inspection and
maintenance services need to assess whether they have the appropriate knowledge, training, equipment and resources for the work they accept. The proposed approach could create
opportunities for companies to broaden their services, but these need to be supported by appropriate competence and a clear understanding of the limits of the work being undertaken.
Who is responsible for a sign after installation? The fourth podcast examines the draft’s concept of the sign holder: The person or organisation that assumes legal responsibility for a sign, depending on the circumstances. Responsibility may sit with a building owner, occupier, tenant or another appointed party. Where arrangements involve a
landlord and tenant, uncertainty over who manages inspection and maintenance can leave responsibilities overlooked. The draft proposes that shared responsibilities are established in
writing, for example through a lease or management agreement. Documentation is equally important.
Knowing what signs are installed, where they are located, how they are constructed, their condition and who manages them provides a foundation for ongoing inspection and maintenance. The draft also proposes that handover
information includes recommended inspection frequency, inspection scope and maintenance guidance. For sign makers and contractors,
this underlines the value of providing relevant information when the installation is completed, helping the sign holder manage the sign beyond the original contract.
What should businesses consider now? BS 559-2 remains in development, and its final content may change through the BSI process. Nevertheless, businesses can
review their current arrangements: are inspection and maintenance responsibilities clear, is handover information adequate, are records maintained, and does the business have the appropriate competence for the work it undertakes? Through the podcast series, the
BSGA aims to make the development of BS 559-2 accessible to the industry and help the industry and wider stakeholder community understand the practical issues it raises.
(L-R) Eye on Display editor Jack Gocher, Displayways director Ben Lambert and MD of the BSGA Linda Edwards
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76