FHS-SEP24-PG26+27_Layout 1 12/09/2024 10:04 Page 27


SUPPLY CHAIN SOLUTIONS


locations and volume of SKUs located on the ground level pick face. Goods are easily accessible from the front of the racking – the rollers on the flow shelves with bins and containers containing small items to be picked roll smoothly to the front of the shelf – which makes picking easy. A full container of items will roll to the operator each time the empty one at the front is removed. Adding simple technologies to live storage, such as pick- to-light and voice picking, will further improve accuracy and throughput speed in a system that offers a step towards automation. Flexible small goods pick faces can also be created from simple, standard shelving to hold plastic bins. Automation does not have to be a fixed


structure. Flexible solutions to help meet the challenge of handling peaks are now available in the form of robotics and Automated Guided Vehicles (AGVs) that benefit from simplified technology to lower their cost and make them more accessible, particularly for smaller operations. Working collaboratively with order pickers, a simple yet productive AGV internal transport system will enable staff to remain at the pick face where they are productive, while the AGV can transport the orders along the pick routes and, once complete, take them to packaging and despatch areas. BITO’s LEO carrier is a good example of such


a system. Delivered in a box, all that’s required to get going is to lay a route marked by a 19 mm wide track line for the transporters to follow using optical navigation. LEO carrier is equipped with a four shelf levels to hold goods being transported. Used as a trolley to accompany the order pickers it can also take picked goods to packing stations, deliver incoming goods to a bin storage facility/ASRS system within a warehouse or feed an elevator to take bins to a mezzanine or multi-level picking structures. It is also light enough to operate on a mezzanine itself. For returns management, it can transport


products going to the same consumer adds further complexity.


FLEXIBLE PICKING Flexible picking systems are the answer. They will need to be scaleable – both up and down – to accommodate large variances in volumes, SKU range and profile. This is not only for fulfilment but also for handling returns, which has a


counter cyclical peak to fulfilment. Scaleability is not just for Christmas – if a retailer’s SKU range or order volumes increase at any point of the year then more pick locations will be required. Storage and picking solutions have traditionally been dependent on labour availability, particularly to handle peaks. However, like many other businesses, warehouses are struggling to find staff, and when they can, they come at a greater cost that eats into margins. This is nudging many to take a look at automated storage. With technology constantly improving,


automation is increasingly becoming a more practical and flexible solution for a greater variety of ‘goods to picker’ installations.


If opting for an automated storage and


retrieval system (AS/RS), then getting the greatest advantage from the investment will means paying attention to the design of the racking. Sourcing racking from a supplier, such as BITO, which can provide uprights in a range of widths to allow optimum adaptation to different load requirements and building constraints will allow a solution that can achieve the required storage density. Indeed, such a supplier will be able to offer the appropriate advice and design high density storage solution to meet any challenge. An alternative to stacker crane based AS/RS


comes in the form of shuttle racking, which provides high storage density storage. Battery- powered and remotely controlled by an operator, a shuttle moves pallets to the back and to the front of a channel, which can be as long as needed. A ‘mechanical’ alternative to automating order picking can be taken with live storage for cartons or pallets stored in FIFO (First In First Out) order. Live storage flow shelves can be easily installed into pallet racking to increase the number of pick


goods to reworking stations or back to the warehouse, with sufficient space for a number of bins and boxes or for individual items. Without the need for complex installation,


costly infrastructure and control software, the low-cost, simple yet effective driverless AGV can play a big role in improving fulfilment centre productivity, with a payback period often in one year or less. A further benefit during peak operations is that the AGV can transport items safely in areas of potential risk, such as busy lift truck routes. For retailers planning their strategy to handle peak season, it is crucial to engage with experts in the field of storage efficiency as well as a supplier that can offer a one stop shop – not just for materials handling equipment, racking, live storage and shelving but also for the containers used with them. Creating a solution that can fulfil orders across all channels accurately, safely and efficiently will significantly contribute to keeping those vital peak trading customers happy and coming back for more.


BITO Storage Systems www.bito.com


FACTORY&HANDLINGSOLUTIONS | SEPTEMBER 2024 27


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58