FEATURE u Robot Solutions
Wind(ings) of change… E
lectrifying innovation in motor manufacturing with Mitsubishi Electric’s robot solutions Integrating Mitsubishi
Electric’s robotic solutions, Horizon Instruments and the Warwick Manufacturing Group (WMG), part of the University of Warwick, have created the first automated solution which combines two key operations in rotor assembly. This setup for magnetisation and magnet bonding in electric motors includes a compact and flexible setup, which leverages a four-axis SCARA and a six-axis articulated robot arm and offers a wide range of motor sizes and topologies. The unit will play a key role in WMG’s Winding Centre of Excellence (WCE), which will be able to offer advanced flexibility, performance, precision and accuracy for the production of next-level motors. The WMG research institution at the
University of Warwick is establishing WCE to help UK manufacturers and supply chain companies deliver the next generation of sustainable electric motors and address electrification needs. It received a share of £33m funding from UK Research and Innovation’s Driving the Electric Revolution Challenge. The centre will be open to external partners and is expected to support a wide range of industry-oriented projects. To succeed, it will feature state-of-the-art winding equipment as well as supporting infrastructures, such as impregnation and machine testing units. Mark Barnett, who is the Business
Development Manager at WMG and Head of Business Development at WCE, says: “We are building an internationally unique facility that will open its doors in 2023. With its cutting edge tools and capabilities, it will attract motor manufacturers looking at advancing the development of their solutions for the automotive, aerospace and many other sectors.”
WINDING INNOVATION ONTO MOTOR PRODUCTION One key innovation that the WCE will offer is combined, fully automated magnetisation and magnet bonding within its production line. Typically, in permanent magnet (PM) electric motors, insertion and attachment of non-magnetised magnet blanks within steel laminate rotors are conducted first whilst the magnetisation of these takes place post-assembly. To streamline the process whilst delivering powerful, more reliable motors with less potential for any defects,
10 October 2022 Irish Manufacturing
Electrifying innovation in motor manufacturing with Mitsubishi Electric’s robot
researchers at WCE wanted to rearrange this process, magnetising first and then placing the components in the rotor.
THE BEST OF BOTH WORLDS The first aspect to address when designing a suitable solution was offering the level of accuracy and flexibility required by the system. In effect, after being magnetised, magnets tend to be very brittle, making their correct insertion within steel laminate particularly challenging. Therefore, the ideal system should offer extreme position accuracy and repeatability, typically provided by CNC machines. Simultaneously, it was imperative to create a flexible setup that could accommodate multiple motor topologies and sizes, which could only be achieved by using robots. To overcome this challenge, Horizon Instrument selected two solutions from Mitsubishi Electric. Melanie Bright, Manager Strategic Partners at Mitsubishi Electric, explains: “Our four-axis RH-6CH and six-axis RV-2FR robots could meet the requirements, as their repeatability is in the order of ± 0.02 mm, amongst the best in the industry. By using these, the WCE could combine the capabilities of a CNC unit with those of our robots.” The resulting design would see the system use the four-axis robot to collect magnet blanks from a preloaded tray and transfer them to a magnetising coil. The six-axis robot, equipped
with an adhesive dispensing head mounted on the wrist joint, applies adhesive to the required slots in the rotor. The fouraxis robot then collects the magnetised magnets and places them in the prepared slots. Once all the rotor positions are filled with magnets, the machine’s doors unlock and the operator can remove the tray and assembled rotor as well as load new components.
COMPREHENSIVE PRODUCT SUPPORT After the two robots were specified, Mitsubishi Electric ensured availability and technical support were provided, including for the unit’s safety system – the MELSEC-WS Series controller. In this way, the team could streamline the completion of the project. In effect, the machine is now fully operational, ready for the official opening of the WCE in 2023. Steve Hilliard comments: “With a global chip shortage currently on the way, Mitsubishi Electric’s support was crucial.” Mr Barnett adds: “We are extremely happy with the solution and automation components provided and excited to be featuring such an advanced unit in our production line at WCE. It will help us engage with key industry partners and deliver future-oriented solutions based on electrification.”
Mitsubishi Electric
ie.mitsubishielectric.com/fa
www.irish-manufacturing.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42
