search.noResults

search.searching

dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
FEATURE FOOD & BEVERAGE


AUTOMATED FISH FILLETING SOLUTION ENSURES QUALITY AND COST EFFICIENCY AT SEAFOOD PARLEVLIET


Since the introduction of the first


prototype, and learning from the vast amount of data collected throughout the development process, the speed of fillets handled by one worker per hour has gone up from approximately 200 per hour during the manual process, to up to 1000 per hour with the latest version of the automated solution. In March 2018, the factory went


through a complete rebuild to automate the entire production line, with three lines now in operation. This has so far resulted in 75 per cent reduction in manual labor for Seafood Parlevliet, with the pick and place of the fish to the production line now as the only manual step in the process. The automated production line includes


The fish manufacturer achieves 75 per cent reduction in manual labour and up to five times the speed with the automated production line. The solution created by Innovotech BV, a local automation partner, includes control and vision systems from Omron, and enables the company to preserve competitive production in the Netherlands


R


aw brined herring is an acquired taste and holds a special place in many


Dutch people’s hearts. Combined with a sprinkling of raw onions, many say that taking a big bite of the herring vertically, holding onto the tail of the fish is the only right way to eat it. However, this poses special requirements during the filleting process, as the tail of the fish needs to be preserved, in addition to demanding quality requirements. Seafood Parlevliet has produced


packaged fish products since 1968 at their family-owned factory at the harbour of Ijmuiden, in the Netherlands. Specializing in fish delicacies such as herring, mackerel and fried fish to the European market, they are a market leader in the retail sector and also supply to the wholesale trade and the healthcare and catering markets.


THE CHALLENGE Filleting herring usually involves several manual steps, and for example skinning the fish could only be done by skilled and experienced workers. In Northern Europe, it is especially difficult to find the right people for the job. In addition, the


22 JUNE 2020 | IRISH MANUFACTURING


seafood market in the Netherlands is very competitive. To ensure efficient and competitive


herring production for Seafood Parlevliet, Innovotech BV, a local automation partner, started developing a new prototype to automate the manual steps in the process, such as skinning and scraping the fish. In addition, the fish needed to be cut to the right size, while keeping the tail. High quality, safety and hygiene needed to be ensured throughout the entire process.


THE SOLUTION As the herring needs to be frozen for a minimum of 48 hours due to health regulations to ensure that no parasites are present, Seafood Parlevliet stores the fish in a frozen warehouse in bags of brine. This also ensures that the fish can be harvested at the best time in the summer, and prepared based for consumers on demand. Once thawed, the herrings go through the automated filleting process in several steps. The solution also includes adding the diced onions, as well as placing the fillets into their final packaging ready for consumers.


Filleting herring usually involves several manual steps, and for example skinning the fish could only be done by skilled and experienced workers


various Omron components, such as frequency regulators, servo drives, feeding solutions, safety blocks as well as the brain of the machine in the panel solution. The panel building for the electrical control of the system was carried out by A. Hagoort Besturings techniek, a specialist in machine control solutions. In addition, Omron FH vision system


and cameras, paired with lighting and bespoke machine vision software, were implemented to carry out several vision checks during the process. The inspection ensures that the appearance of the fillets meets the high quality standards of the company, so that for example no traces of blood are present, and that the skin and fins of the fish consistently meet the customer requirements. Any fish that does not meet the requirements will be removed from the production line.


THE BENEFITS “We believe that finding the perfect technical solution using the best components available has resulted in the perfect solution also in terms of quality and economics,” said Rick van den Berg, R&D manager at Innovotech BV. “Thanks to continuous development, the high- quality components from a single source, and the vision expertise of Omron, we have been able to automate the filleting and packaging operation. The machine can now handle any type of herring with high precision and accuracy, while ensuring consistency for the customers,” Van den Berg concludes. “With machine vision, we can help


Omron www.omron.co.uk


ensure 100 per cent quality of each fillet that goes through the production line,” said Mark van den Hoek, sales engineer at Omron.


/ IRISHMANUFACTURING


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36