IC-JANFEB23-PG10_Layout 1 30/01/2023 10:29 Page 10
HAZARDOUS AREAS
THE EVOLVING ROLE OF EVS IN HARSH ENVIRONMENTS
A
lthough EV technology is ever evolving, placing these vehicles in harsh, unforgiving environments might seem counterintuitive. High temperatures can affect the
functioning of chargers and reduce the lifetime of vehicles, while environmental conditions, like dust and debris, can have a negative impact on the power electronics of batteries and chargers. However, we are now seeing a shift in mindset and, as designs and components become more sophisticated, it is reasonable to expect EVs to eventually replace ICE vehicles in hazardous environments as well as the domestic market.
THE IMPORTANCE OF COOLING
As the domestic EV market has grown, more EVs are being used in harsh and hazardous industrial environments. Recently, there has been a rise in the number of electrified and battery-powered explosion-proof vehicles. Unlike ICE counterparts, these avoid ignition risks in the surrounding atmosphere, reducing the likelihood of explosions. Therefore, there is now a growing gap in the market for explosion-proof trucks and vehicles in ATEX environments like oil and gas processing plants, mining facilities and chemical plants. Every electric car battery needs a cooling system, they operate optimally at certain temperatures and are designed to only withstand certain temperature fluctuations. Generally, lithium-ion batteries operate best between 20°C to 40°C, so operating outside this range requires an appropriate cooling system to facilitate heat dissipation. Generally, most electric vehicles use a cooling loop containing an ethylene glycol coolant, which is circulated through the batteries via an electric pump.
As demand for EVs grows in ATEX and other extreme environments, design engineers and vehicle manufacturers can expand their applications by incorporating liquid cooling systems from the beginning. When relying on air cooling and fans, vehicles are at risk of dust and other debris entering through the
The UK’s electric vehicle (EV) market is growing and, although their benefits for everyday motorists are well- documented, these vehicles have lots of untapped potential in harsh industrial environments, such as ATEX. Here Steve Hughes, managing director of EV power specialist REO UK, explores the evolving role of EVs in extreme environments.
vents and causing damage. Every vehicle is designed for a bit of wear and tear, but if EVs are being driven in extreme conditions on a regular basis the lifespan of the car could reduce significantly.
On the other hand, transferring heat from the engine components using liquids such as water can provide effective heat dissipation without potentially harmful particles entering the system. Meanwhile, an internal thermal switch can be used to execute a safe and controlled shutdown of the system if the coolant runs out or the cooling system fails.
BRAKING RESISTORS
As EVs are more widely used in unforgiving environments, another area of importance is braking resistors, which protect the electric motors from voltage rises in the DC link. No resistor is the same, and heavy vehicles and trucks need high wattage braking power and effective heat dissipation to maintain driver safety when they brake sharply. Installing water-cooled braking resistors is a vital step before bringing these vehicles into more arduous settings, whether these are processing plants or oil and gas facilities. To help meet this demand, REO recently began supplying the BWD 158
standard range, which is rated for continuous power of up to 5,000 W. It has a high overload capacity - up to 33 kW - and a low surface temperature, which can be lower than the ambient temperature in certain environments. Therefore, this new product lends itself to operation in ATEX environments, where a high possibility of explosion necessitates low surface temperatures.
As EVs overtake traditional ICE vehicles, their role in ATEX and other potentially hazardous environments will only increase. Preparing these vehicles for challenging surroundings like processing plants means starting at the design phase and specifying a liquid cooling system to shield the battery and other electrical components from the effects of extreme heat and debris. Integrating water- cooled braking resistors can also help ensure driver safety in the most difficult of terrains.
REO UK
www.reo.co.uk
10 JANUARY/FEBRUARY 2023 | INDUSTRIAL COMPLIANCE
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46
