PPE EXPERTISE WHEN IT MATTERS MOST
DO NOT GET BURNED BY BUYING THE WRONG PPE
W
hile many could be forgiven for thinking that flame retardant PPE can also help to protect against burns in an Arc Flash
incident, what many do not realise is that these burns are not caused by fire, but by thermal energy, and protecting yourself and your team against an arc flash incident requires more specialist garments.
WHAT IS AN ARC FLASH? Hotter than the sun and louder than a bullet, an Arc Flash is when an arcing fault releases dangerous levels of radiant energy, which vaporises metal that spews from the arc. The air is super-heated causing pressure waves that can throw individuals across rooms and create a deadly molten shrapnel. They can be caused by voltage spikes, worn connections, cable strikes or gaps in insulation, and are a risk even in low-voltage set ups. Treatment for those that survive an incident can require years of skin
grafts, hospital stays and rehabilitation – they may never recover sufficiently to regain their lifestyle, so it is safe to say that choosing the appropriate PPE is key when it comes to arc flash safety.
WHAT’S DIFFERENT ABOUT ARC FLASH PROTECTIVE CLOTHING? While many might think flame retardant PPE can also provide protection in an Arc Flash incident, there are in fact separate safety standards for Arc Flash clothing, which go further than the ones for fire resistance, meaning that the level of protection provided by flame retardant clothing does not match that of Arc resistant PPE. Arc Flash protective clothing is designed to not only protect you from
fire, but from the thermal energy generated by an Arc Flash, which can also cause external and internal burns. In fact, fabric used in Arc resistant garments must meet higher tear resistance and tensile strength than those used for fire-resistant clothing. While the threads used for the structural seams must be fire-
resistant, under IEC 61482, Arc Flash resistant clothing has various standards that separate it from fire-resistant clothing. Each Arc- resistant garment must be designed in a way to allow the wearer to quickly remove the item; must always have long sleeves rather than short sleeves; and feature no exposed metal. When searching for appropriate Arc Flash PPE, safety experts should
keep their eyes peeled for SafetyICON marking or equivalent, which allows workers to see what type of protection they offer, as well as suitable, arc resistant components, which have been safety approved and tested to withstand an Arc Flash incident. Additionally, protective garments that are 100 per cent inherent
(with protective fibres woven into the fabric), provide durable flame resistant protection that will not wash out. However, it is not just the fabric that needs to be Arc Flash resistant,
to provide the ultimate protection, garments should have every stitch, button, popper, zip and press-stud as flame resistant to provide enhanced and effective Arc Flash protection as well as durability.
ProGARM
www.progarm.com INDUSTRIAL COMPLIANCE | SPRING 2019 17
• Testing • • • ISO 17025 •
ppe@satra.com 01536 410 000
www.satra.com
PPE FEATURE
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32
