FEATURE HAZARDOUS AREAS
IMPROVING ENVIRONMENTAL SAFETY THROUGH RESPONSIBLE MONITORING
T
he escape of chemical pollutants into the environment either by air or water can pose a
major environmental risk, not just on an industrial site but also to the surrounding area. For this reason, sites need to be carefully monitored so that emissions are accurately measured not only at known points of discharge, such as stacks and drainpipes, but also any other areas where there is a possibility of leakage. With increasingly stringent requirements covering
industrial emissions to the environment, plus the threat of stiff financial penalties, it is vital for companies to ensure that their operations are fully compliant at all times. To prove this compliance, UK chemical companies operating with Environmental Permits are obliged to monitor and report their emissions on a regular basis using appropriate equipment as and where necessary. Introduced in January 2011, the Industrial
Emissions Directive (IED) places a particular emphasis on the use of both equipment and procedures that constitute Best Available Technique (BAT). BAT effectively sets a benchmark for industrial companies in the way that they both measure and manage their emissions and effluent flows, with many organisations being responsible for monitoring and reporting their own emissions. Choosing the right analytical equipment for an
application can be a difficult process, which requires consideration of a number of factors over and above the device itself. To ensure a thorough monitoring regime, organisations must plan carefully. Most crucially, all potential releases, whether to air or water, need to first be identified and categorised. Consideration must also extend to the likelihood of fugitive emissions, including the most likely points where leaks are likely to occur and the composition of the emissions themselves. In the event that a site is also likely to have
some form of treatment plant installed, there is the added requirement to be able to measure the composition and strength of a gaseous or liquid emission. This applies site-wide, covering not just the production process and discharge points such as stacks and vents, but also any areas where chemicals are stored. Once these have been categorised, it is then
possible to start the process of choosing the correct equipment. To assist in the selection of the right
instrumentation and monitoring systems, the EA established the MCERTS scheme. MCERTS is designed to ensure that whatever monitoring systems are in place are fit for purpose, including the equipment, techniques, organisations and responsible personnel. In terms of equipment, the EA requires process
owners and operators to use instrumentation from an approved list. The list is available from Sira, which operates the scheme on behalf of the EA. Various different types of monitoring system are included under MCERTS, but the most relevant category for airborne chemical emissions monitoring is Continuous Emission Monitoring Systems (CEMS), with Continuous Ambient Monitoring Systems (CAMS) and Portable Emission Monitoring Systems also playing a possible role. Similarly, the list also covers monitoring equipment for water sampling, for applications with liquid process effluents. For both air and water-borne emissions, users
will be obliged to choose instruments from the approved MCERTS list, but there are still choices to be made within that. For example, it is generally better to opt for an instrument with the lowest possible certified measurement range, which will often enable more accuracy through the overall measurement system. How is the instrument calibrated and how often and how tricky will it be to maintain? The accessibility and clarity of the data is another
issue, so consider the data acquisition and reporting system (DARS) associated with the
14 SPRING 2019 | INDUSTRIAL COMPLIANCE
instrumentation. Which software package does it use? Is it supported directly by the instrument manufacturer or have they sourced it externally? Looking beyond the equipment itself,
reputable equipment suppliers are another great source of support and advice, so it is important to pick the right one. Consider the company as a whole and ask as
many questions as you can. Where do they manufacture the equipment and how much experience do they have with CEMS? What sort of warranties do they provide, since this could be a good indication of the build quality and workmanship in the products? Does the company have experience of integrating with third-party products and can they supply a list of references? Consider paying a visit to existing customers if possible. The other big issue is the level of support
available and whether it matches your expectations and needs. Where is the supplier located and how quickly can they respond to a problem on site? Can they provide diagnostic help on-line? Are spare parts held in the UK and how quickly can they get them to you? Will the supplier train your staff in using and maintaining the new equipment? ABB has a wealth of expertise in the
design, manufacture, supply and service of instrumentation and monitoring equipment for chemical emissions monitoring. For advice on the best solution for your application, please call 0870 600 6122 or email
moreinstrumentation@gb.abb.com ref: ‘environmental safety’.
ABB
www.abb.com / INDUSTRIALCOMPLIANCE
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32
