MIXING EQUIPMENT
read about how Sone customers process was revolutionised with the introduction of Silverson’s high shear mixing into their process.
CASE STUDY: HIGH SHEAR POWDER/LIQUID MIXER REDUCES PROCESS TIMES BY OVER 23 HOURS
insufficient for the application. Low density powders, for example, tend to float or “raft” on the surface. Traditional mixers, such as agitators or stirrers, cannot overcome the buoyancy and so this leads to incorporation issues. Insufficient shear can often lead to incomplete dispersion and hydration of powdered ingredients. Even “high speed” agitators do not generate enough localised shear to prevent or even break agglomerates once they have formed.
WHAT IS THE KEY TO SMOOTH POWDER INCORPORATION? The solution to most of the above problems is the mixing equipment, specifically high shear mixing equipment. Unlike conventional mixers or agitators, high shear mixers utilise specialised rotor/stator technology to generate extremely high shear rates, creating a powerful suction effect that continuously draws materials into the high shear zone.
Leveraging this advanced technology, high shear mixers provide remarkable mixing efficiency, enabling:
Instant wetting and dispersion of powders into liquids
Faster processing times and increased production throughput.
Full powder ulitisation, maximising yield of raw ingredients.
Improved product quality, consistency, and stability across batches.
HOW DOES HIGH SHEAR WORK?
1. The powerful suction created by the rotor draws powders and liquids directly down into the workhead. This eliminates rafting on the vessel surface.
UKManufacturing Summer 2026 45
2. Centrifugal force drives the powder and liquid towards the periphery of the workhead, where they are subjected to intense high shear in the gap between the rotor and stator wall. The product is forced out of the stator and projected radially back into the body of the mix.
3. In a short time, all of the material will pass through the workhead several times, exposing an increasing surface area to the surrounding liquid rapidly completing the gum hydration. You will achieve an agglomerate-free, consistent solution time after time.
High shear technology does not just solve technical problems, it helps to increase the product quality and offers benefits such as increase profitability due to lower raw material, processing and labour costs.
Silverson Machines has nearly 80+ years of experience helping customers mixing powders into liquids, and in that time, it has seen the benefit of high shear mixing. In the following case study,
A French manufacturer dramatically reduced mixing times and improved their product quality after implementing a Silverson Flashmix Powder/Liquid Mixer. The company, which produces formulations containing Xanthan Gum, CMC, Carbomers and pigments, had previously relied on a fast impeller mixer. Batch processing could take up to 24 hours, yet agglomerates and unhydrated powder often remained, requiring additional filtration and increasing production times. Seeking a more efficient solution, the company worked with Silverson to conduct on-site trials using a Flashmix FMX50 Powder/Liquid Mixer. The trials evaluated a range of powders, including Xanthan Gum, cellulose polymers, sodium carbonate and natural pigments, across batch sizes from 3,500 to 27,000 litres.
In one trial, 17kg of Xanthan Gum was incorporated into 3,500 litres of vinegar in just 50 seconds and fully dispersed after 35 minutes of recirculation. The Flashmix’s high-shear rotor/stator design ensured complete hydration and dispersion. The resulting mixture met the required specification without agglomerates or the need for filtration, with a dramatic reduction in processing times. Following the successful trials, the company purchased the Flashmix.
Silverson offers a range of mixers for the dispersion of powders into liquids, to find out more, or to trial a mixer for yourself, visit:
www.silverson.co.uk
Silverson Machines
www.silverson.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48
