LINEAR MOTION
ELECTRIC LINEAR ACTUATORS DELIVER PRECISION AND RELIABILITY IN HARSH ENVIRONMENTS W
hen an application requires linear motion, electric linear actuators are the prime choice when precise and repeatable performance is required. Compared to rotary motors and their required mechanical linkages, electric linear actuators minimise the challenges of backlash, friction, and variability. Instead, contrasting with hydraulic and pneumatic actuators, electric linear actuators remove the maintenance problems associated with traditional designs, while still being capable of high force, as well as improved control precision. Even when traditional hydraulic and pneumatic actuators have been preferred for harsh environmental conditions, today’s designs of electric linear actuators are often more robust and longer lasting. Situations that test extreme temperature resistance, debris and moisture ingress, corrosion, as well as shock and vibration, are critical to a range of linear motion requirements. These applications often take place in outdoor settings exposed to the elements and involving high loads. However, indoor applications can demand the strongest resilience to harsh conditions, whether that’s the durability demanded by heavy industry, or ensuring critical factors are met, such as hygiene standards essential to the pharmaceutical and food & beverage sectors.
COMPARISON WITH HYDRAULIC AND PNEUMATIC TECHNOLOGY The durability of electric linear actuators mainly results from the design and materials involved with the housing, materials, and seals. These designs can exert forces up to 294 kN (66,000 lbf), comparable to a hydraulic or pneumatic system yet occupying a significantly more compact footprint. Shock loads can also be managed with features such as
22
Electric linear actuators are increasingly preferred over hydraulic and pneumatic systems for applications requiring precise, repeatable linear motion, even in extreme environments. Fully sealed housings protect internal mechanics and electronics from dust, moisture, corrosion, and shock, while maintaining consistent force and precise positioning. With the right specification, electric linear actuators are well suited to high-force, heavy- duty industrial operations, as well as hygienically sensitive applications such as food & beverage production. Gerard Bush, engineer at motion specialist INMOCO, explains.
steel heads with integrated trunnions, allowing the mechanical connection to pivot.
However, a key advantage is that electric designs keep working in harsh conditions when the performance of hydraulic and pneumatic systems starts to fail. Electric linear actuators from brands like Tolomatic can operate in temperature extremes above 100°C and below 0°C thanks to specially prepared motor windings, as well as sealed bearings with temperature-appropriate lubrication. Thermal limitations of pneumatic systems include condensation and freezing, while high temperature can impact performance if pressure is not precisely and reliably regulated. For hydraulic systems, the impact of temperature extremes on oil viscosity and seal life can also present performance challenges, which requires attention in regular maintenance.
SEALED HOUSING OPTIMISES PROTECTION
A common challenge of extreme environments is protecting against the ingress of dust and moisture. Pneumatic designs can be susceptible to dust ingress where the rod exits the actuator, and protective boots are often needed to protect
this area, particularly in wet environments. Hydraulic systems can also require additional protection around seals, and while seal wear leads to oil leaks, damage to this barrier also exposes vulnerabilities for ingress. Alternatively, an advantage of electric designs is that sealed housings protect internal mechanics and electronics, whereas hydraulic and pneumatic actuators are primarily designed to contain internal pressure, hence the need for coverings to protect exposed areas. The sealed body of the electric actuator also carries a standardised ingress protection rating, presenting straightforward identification of its capabilities. Tolomatic actuators are rated up to IP69K, suitable for high-pressure, high-temperature wash downs required in hygienic applications. These designs can also be configured with stainless steel and hygienic hardware that prevents corrosion from moisture, chemicals, or washdown processes.
REAL-WORLD ADVANTAGES
Looking at electric linear actuators in real use cases, the moulding operation of an automated sand casting line in a steel foundry replaced its hydraulic actuators with two Tolomatic RSX15 Extreme
Summer 2026 UKManufacturing
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48
