EVENT VISION 2022
Vision software optimises brake disks’ quality assurance and verifi cation
S
ince 2014, MOSAIC’s team of engineers have designed, built and maintained vision systems for sectors including automotive,
food & beverage, paper, logistics and pharmaceutical production. A key inspection system in their automotive vertical conducts surface- quality inspections on car and truck brake disks. Quality assurance is integral to the production of brake disks, which are made through a casting process, characterised by using sand as mould. From start to finish, the production process for brake disks encompasses sand-casting, sand removal and disk separation, cleaning/blasting, quality inspection, and disk machining phases. Prior to the upgrade, human operators would evaluate the quality and condition of the disks, checking for sand and sintering traces, and remove non-optimal units from the production line to avoid damaging the machining tool. Marco Pistilli, IT engineer, machine- vision system and software developer at MOSAIC, said: “With human inspectors, it is natural that product samples will be assessed differently by different operators. The likelihood of these differences increases after humans have worked a few hours and are tired.” MOSAIC sought an enhanced quality-
control solution using machine-vision technology to identify bad units more reliably and effectively. “With a vision system, in addition to the enhanced quality control, inspections are repeatable 24 hours a day and the machines perform faster than any operator could,” said Pistilli. Their team decided upon Matrox® Imaging’s software and components, due to the technical support, software features, performance and great price-to- quality ratio the company offers. For the highest quality standards, the custom vision system was tuned to highlight subtle defects that only
32 September 2022 | Automation
The sand-casting process complete, a finished brake disk undergoes a scan to check that the surface is free of particulate traces. Image sensors are more responsive to lower wavelengths, which accounts for the unique purple tone of the image. Working with purple light best brought out the defects, allowing the MOSAIC team to shorten the exposure and thus speed up the vision inspection
experienced quality inspection workers would notice. MOSAIC selected flowchart-based Matrox Design Assistant®
X vision software because
of its effectiveness, precision and fast response.
The software runs on an HP workstation equipped with an Intel Core i9 processor and three Matrox Concord PoE frame grabbers, which acquire and process the images coming from nine Teledyne DALSA cameras – seven Genie Nanos and two line-scan models. Each camera has a different shooting position, capturing images whilst the disks pass through the inspection tunnel on the moving production line. A custom-built lighting system uses MidOpt filters on camera lenses and spotlights. The vision system interacts with a PLC via fast- scan modules and an encoder; hardware triggers come directly from the PLC. The MOSAIC team had three objectives for the new vision system. First, they wanted to inspect every angle of the disk surface without stopping production or needing to invert or rotate disks as they passed. The short cycle time made physical displacement of the disk an encumbrance to the process, so integrating nine different cameras to catch every disk angle helped address this concern.
They also wished to conduct quality assurance for over 200 different disk models with the same vision setup.
“By developing an effective
background removal algorithm in Matrox Design Assistant X to process all the disk models with the same logic and processing algorithm, there is no need to redefine regions of interest,” said Pistilli. Finally, precise image acquisition was central to system development. Matrox Design Assistant X’s convenient Operator View lets the operator manage recipes, create sets of parameters for each camera on the line, and customise the image colour map to best match their needs. A filmstrip recalls previous pictures and relative datasets for further analysis. A dataset is generated for each analysis for further investigation by the quality-assurance department. Thanks in part to the successful implementation of this vision system, the MOSAIC team are exploring building a new system using Matrox Imaging hardware and software. “Matrox Design Assistant X software allows us to quickly deploy feasibility studies and application demos within the production software. The completeness of its tools helps us to work on both 2D and 3D systems,” added Pistilli.
CONTACT:
Matrox Imaging
www.matrox.com/en/imaging
automationmagazine.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64
