FEATURE FLOW & LEVEL CONTROL
The challenges associated with the accurate level measurement of bitumen at Chase Protective Coatings have been overcome thanks to the installation of the VEGAPULS 80 GHz radar sensor from VEGA
B
itumen is always a difficult product to measure, made challenging due to
high temperatures, build up, splashing, sublimation and ready adhesion. Its handling safety parameters are also very high, with comprehensive safety guidelines from bitumen suppliers’ organisations and industry regulators. As part of this, effective, reliable level control for tanks is therefore of paramount importance. An 80 GHz radar is proving a suitable
solution for bitumen storage tank levels at Chase Protective Coatings at Rye, in East Sussex. In the spring of 2016 they installed one of the first of this new generation of radar level sensors in the UK. It has been in operation ever since, providing a ‘long term’ testimony for what is still a relatively new technology. This application also provides a valuable insight to where the difference lies between various radar frequencies. Chase make coated products for
STAY FOCUSED IN BITUMEN LEVEL MEASUREMENT ‘The focused capability results in
non-contact radar devices that are easier and faster to set-up’
the level in the vessel, as the ‘echo picture’ was too confusing. This caused problems for production planning (how much is left?) and concerns for safety during filling (how much can we put in?). So a new solution was sought. Ideally, Chase still wanted a non contact device that could measure the level all the way down and be easily installed, without contact to the product. VEGA supplied its
latest 80 GHz technology radar
sensor: VEGAPULS 64, on a sale or return basis. It was
put forward for two main
industrial use, including industrial coatings, tapes, adhesives and sealants, which are marketed under brand names recognised for reliability and trusted in their respective industries. Among the product lines produced at the Rye plant are cold applied bitumen tapes for light, medium and heavy duty pipe wrapping, along with other specialist tapes, moulding compounds, grids, marine tapes and PVC pipe wraps. One of their bitumen storage vessels
was not a ‘new vessel’ by any means, and at around 6m high, not particularly tall either. The previous level device on it was another manufacturer’s GHz technology radar transmitter. It had never been able to measure the full vessel contents, because a very wide beam angle and some internal plates meant that it detected too many ‘false reflections’ for the sensor to deal with. The result was that below a certain point it was impossible to measure
6 MAY 2019 | PROCESS & CONTROL
reasons; its performance with build up and its focusing. Build up on sensors when measuring bitumen is always a challenge to overcome, from splashing during filling and the sublimation of tar fumes, to heating during storage. The high sensitivity electronics in this latest technology has the benefit that even heavy build up has minimal affect on sensor performance, and it has worked consistently without requiring cleaning.
The radar mounted on a DN80/3” nozzle on the vessel at Chase Protective Coatings
This long term reliability is just what users are looking for with this kind of product. Radar has an additional benefit, it measures liquid surface level/volume, so its accuracy is not influenced by changing product density either. Focusing is another great advantage of
this VEGAPULS 80 GHz radar, especially when compared to the 6GHz predecessor in this application. Its measuring beam is approximately 10 times better and sharper focused. So, if you compare 2 radars of each technology, both with a 3” antenna: 6GHz would be in the region of 30 degrees ...whereas the 80 GHz is just over 3 degrees! This improved focusing means that the radar signal path between the sensor and liquid surface does not see any interference from vessel walls, no false signals from rings of build up, or vessel internals. This focused capability results in non-contact radar devices that are easier and faster to set up, less likely to need tweaks and ‘remapping’ of false signals in vessels, delivering accuracy and reliability in the long term. After its trial period ended in mid 2016,
The bitumen storage tank is around 6m high, and thanks to the Vega technology, Chase can now measure reliably and safely down to the vessel bottom
the device was purchased. The main benefit to the customer was being able to measure reliably and safely down to the vessel bottom, thus enabling smoother planning of production and effective scheduling of deliveries. Additionally, this device also has Bluetooth communications, which means at any time it can be remotely and safely accessed, to check level readings or diagnostics, without climbing the vessel or physically connecting to the sensor. The engineering manager for the site said: “We haven’t had a reading down at that level for years!”
VEGA Controls
www.vega.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
