PNEUMATICS & HYDRAULICS FEATURE
FP 70 SMOOTH FLOW PUMP – LOW IN PULSATION, HIGH IN EFFICIENCY
B
y adding the FP 70 to its Smooth Flow liquid pump family, KNF is addressing the market need for pumps with lower pulsation. The new product combines the established strengths of KNF diaphragm pump technology
– self priming and dry running ability, gentle and clean liquid transfer, excellent chemical and abrasion resistance – with the smooth flow normally associated with gear and centrifugal pump
technologies. This combination makes the FP 70 a package for customers in all markets, where reliable and gentle transfer of precious liquids is key.
The integrated low-pulsation technology improves the efficiency of
the pump and the customer’s fluidic system. Due to the smooth and steady flow, the impedance of the customer’s fluid system is greatly reduced and flow performance is significantly improved. This can be a crucial factor if small bore tubing is used in the customer’s system. Another benefit is the reduced risk of bubble formation and foaming.
Most fluid systems incorporate other components, such as filters and sensors, which are also positively affected by the low pulsation. Lower pressure means less stress on these part. A pump with smooth flow delivery makes control and integration much simpler. In medical applications, where equipment is often situated close to,
or in direct contact with the patient, minimising pulsation can have a positive impact. Any pulses in the liquid are transferred to the tubing and to other parts of the equipment, so smooth flow helps to make treatments a calmer and less stressful experience. Integrating a pump into a system with additional pulsation damping
elements and extra fittings and tubing can be challenging where space is limited, and the extra components add cost. The FP 70 solves these problems by having all the necessary damping technology integrated. In its standard configuration, the FP 70 delivers flowrates up to
850ml/min and is designed for continuous operation up to 2bar pressure. On a project basis, configurations offering up to 1.2l/min, or up to 4bar are possible. The integrated dampers reduce the pulsation very effectively at both the pump inlet and outlet. Patented 4-point valves ensure reliable self-priming of the pump, even at very low motor speed. The FP 70 can be equipped with motors ranging from high-end
programmable BLDC motors to lower-end DC motors. Furthermore, our programmable BLDC motors can be customised by KNF to provide customer-specific control behaviour and individual pump calibration to deliver precise and consistent performance from every pump. Along with a wide selection of elastomers such as EPDM, PTFE, FFKM and FKM, different hydraulic connectors such as compression fittings, push-in fittings, inside threads or hose barbs, the pump may be further customised according to the customer’s needs. All in all, the FP 70 offers great
value to the customer by combining the best of both worlds: the low pulsation from gear and centrifugal pumps and the strengths known from diaphragm pumps.
KNF
www.knf.com
• Digitally customisab • Innovative 4 point v • Integrated damper Low in Pulsatio
Low in Pulsation, High in Efficiency • Integrated dampers providing smooth flow • Innovative 4 point valves for reliable self-priming • Digitally customisable motor for precise flow control • Nominal Flow 700 ml• Nominal Flow 700 ml/min/min • Pressure 2 barg
ble motor for precise flow control valves for reliable self-primin s providing smooth flow on, High in Efficienc
cy
trol ng
• Higher flow/pressur
Higher flow/pressure versions available on request • Ideally suited for ap
Ideally suited for applications requiring reliable and gentle transfer
and gentle transfer of precious liquids r of precious liquids KNF - your pa KNF your pa
For further info contact:
KNF - your partner for artner for customised pumps and syste ms ther information ormation Tel: 01993 778373
el: 01993 7783 E-mail:
info.uk@
.knf.c
E-mail:
info.uk@
knf.com
www.knf.com
@
knf.com 373
com
pplications requiring reliable re versions available on request
est
READY. STY. STEADY FLOW NEW FP 70
TEADY.. FLOW FP 7 70 Smooth Flow Pump Smooth Flo ow Pump
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44