WIREDCONTROLS
BATTEN MOUNT Switching PIR Sensor MAIN FEATURES
• Highbay (up to 15m height) • Remote-controllable
On/off Control
This sensor is a motion switch, which turns on the light upon detection of motion, and turns off after a pre-selected hold-time when there is no movement. A daylight sensor is also built in to prevent the light from switching on when there is sufficient natural light.
Functions and Features
IP65 Rating CAT NO.
With sufficient natural light, the light does not switch on when presence is detected.
DESCRIPTION LPCBHMPIRM65 Batten mount switching PIR sensor PRODUCT ACCESSORIES Detection Pattern
CAT NO. LPCUHC
With insufficient natural light, the sensor switches on the light automatically when presence is detected.
DESCRIPTION Infrared remote control with settings SENSOR DETECTION
MAX RECOMMENDED MOUNTING HEIGHTS
The sensor switches off the light automatically after the hold-time when there is no motion detected.
12m
3
12m 15m
*for forklift
Tangential movement up to 12m Radial movement up to 8m
Tangential movement up to 16m Radial movement up to10m
*The detection patterns are based upon 5km/h movement speed.
PRODUCT DRAWING Settings (Remote Control LPCUHC-02/HRC-11)
ON/ OFF
Permanent ON/OFF function
Press button “ON/OFF” to select permanent ON or permanent OFF mode. * Press button “AUTO”, “RESET” to quit this mode. The mode will change to AUTO Mode after power failure.
ø40mm Reset Settings
Press button “RESET”, all settings go back to factory default settings. Hold-time: 5min, daylight threshold: 2lux
26 Lighting Controls Subject to change without notice. Edition: 03 Jun. 2020 Ver. A0 Page 3/4 107mm 21mm
m20 x 1.5mm
17mm 34mm
LIGTHING CONTROLS
28.2mm 18.8mm
29mm 14mm
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32
