Fibre Optic Warranty
The 25 Year Warranty covers all permanent fibre cabling, adaptors and connectors within the horizontal cabling of an Ultima fibre cabling system which has been tested and certified as such in place of the warranty set out in our current terms and conditions of sale. All other provisions in our standard terms and conditions shall continue to apply.
• Tier 1 testing must be completed for each link that requires a warranty
• The tester shall be calibrated in accordance with the tester manufacturer’s requirements.
• Where the date of the results is outside the manufacturer’s calibration period, the results will not be accepted and the warranty application will be rejected
• The tester shall be set to the correct fibre characteristics (e.g. Index of Refraction) as per the product’s published specifications
Maximum Allowable Link Losses in Accordance with ISO 11801
Optical Fibre Type OM1 (62.5/125μm)
OM2 (50/125μm) OM3 (50/125μm) OM4 (50/125μm) OS2 (9//125μm)
Loss/km in db*
850nm 3.50 3.50 3.50 3.50 N/A
1300nm 1.50 1.50 1.50 1.50 N/A
1310nm N/A N/A N/A N/A
1.00
1550nm Connector N/A N/A N/A N/A
1.00
*Link loss (db) = Cable loss + Connector loss + Splice loss Ultima reserves the right to decline the warranty if test results are altered in any way
Ultima warrants the following: 1. All products forming part of a certified system will be free from manufacturing defects for a period of 25 years from the date of installation or invoicing, whichever occurs first, and
2. The installation will satisfy the transmission performance requirements of the relevant standard as tested at the time of installation for a period of 25 years from date of installation provided that:
2.1. The installation is designed and installed in accordance with Ultima requirements by a current UCI
2.2. The installation is fully tested to the current edition of the relevant standard and thoroughly documented
2.3. All results and installation details are supplied to Ultima along with details of any moves and changes
0.75 0.75 0.75 0.75 0.75
Splice 0.30 0.30 0.30 0.30 0.30
• Results to be submitted in the original tester format, e.g. LanTEK Reporter or Fluke Networks LinkWare
• Where testing has been performed by other methods, i.e. Loss Test Set or individual Light Source and Power Meter, the results must be submitted as a link loss sheet on letter headed paper and signed by a Director or Senior Manager of the company
• The test results must show the overall attenuation of the link
• The maximum allowable loss can be worked out using the following table
www.ultima-comms.com
121
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124
